Installation Guide

STEP 2.
MOUNT CORNER TOWER
Loosen set screw on both of the plastic end caps located at the rear (tailgate end) of the BEDTRAX.
Remove end caps and insert (4) MOUNT BLOCKS down each side of the BEDTRAX.
Set end caps aside. Next invert
CORNER TOWER, slide MOUNT BLOCKS underneath the CORNER TOWER so they line up with the mount
holes. Secure using the supplied 1/4-20 x 3/4” allen head bolts in to the MOUNT BLOCKS.
*CORNER TOWERS are positioned upside down and rest on the BEDTRAX for shipping purposes.
*Insert (6) MOUNT
BLOCKS per side if your BEDSLIDE is equipped with GUARDRAILS.
Page 2 of 7
BEDSLIDE.COM | 888.807.0099
REAR BEDTRAX (HANDLE END)