Installation Guide

BEDSLIDE.COM | 888.807.0099
Page 1 of 5
STEP 1.
CENTER BEDSLIDE® IN TRUCK BED
Place assembled BEDSLIDE® in truck bed. Center between the wheel wells and leave 1 ½” clearance
space between bulkhead and BEDSLIDE® frame. Next make sure tailgate clears the BEDSLIDE when
tailgate is closed and that the BEDSLIDE® does not make contact with tailgate when slid open.
If BEDSLIDE® does not clear the tailgate or has the step in the gate you will need our LIFT BLOCK KIT
PART #BSA-SPACEBLKIT
GET TO IT.
Supplied Hardware: (4) 5/16 riv nuts, (1) riv nut tool,
(4) 5/16 x 2” hex head bolts, (4) 5/16 split lock washers,
(4) 3/8 flat washers
Tools Needed: Drill, 1/2” drill bit, sharpie, tape measure,
½”socket, ratchet, ½” open end wrench
INSTALLATION
INSTRUCTIONS
Center BEDSLIDE between wheel wells
LEAVE 1 ½” SPACE