IR-710 IR-710-EUR 10:1 Infrared Thermometer Users Manual
IR-710 IR-710-EUR Users Manual 6/2015, 4279838 C ©2015 Amprobe Test Tools. All rights reserved.
Limited Warranty and Limitation of Liability Your Amprobe product will be free from defects in material and workmanship for one year from the date of purchase, unless local laws require otherwise. This warranty does not cover fuses, disposable batteries or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling. Resellers are not authorized to extend any other warranty on Amprobe’s behalf.
CONTENTS SYMBOLS.....................................................................................................................2 SAFETY INFORMATION...............................................................................................3 UNPACKING AND INSPECTION...................................................................................4 FEATURES.....................................................................................................................4 HOW THE THERMOMETERS WORK.
IR-710 / IR-710-EUR 10:1 IR thermometer 1 2 4 8 5 6 10 3 7 9 1 Laser Aperture 6 Temperature Unit °C / °F 2 Trigger 7 MAX / MIN Temperature 3 Battery Cover 8 Display Backlight 4 Display Hold (After releasing the trigger) 9 Low Battery Indicator 10 Making Measurement (pulling the trigger) 5 Laser Indicator SYMBOLS � Caution! Refer to the explanation in this manual. Warning! Laser light. Do not stare into laser beam. °C Celsius. °F Fahrenheit. Battery indication.
Safety Information The instrument complies with: EN 61010-1 General Safety EN 60825-1 Laser Safety EN 61326-1 Electromagnetic Emissions and Susceptibility X�Warning: Read Before Using • • • • • • • • Do not stare into laser beam. Do not point laser directly at eye or indirectly off reflective surfaces. For use by competent persons only. Replace the batteries as soon as the low-battery indicator appears. Verify the tester’s operation by measuring on a known temperature source.
Unpacking and Inspection Your shipping carton should include: 1 IR-710 or IR-710-EUR Thermometer 1 9V battery (installed) 1 Users Manual If any of the items are damaged or missing, return the complete package to the place of purchase for an exchange. FEATURES The Amprobe IR-710 / IR-710-EUR, a 10:1 distance to spot ratio infrared thermometer, offers best in class accuracy and response time with a temperature measurement range of 0°F to 716°F or -18°C to 380°C.
Button Description. °C °F Toggle between Celsius and Fahrenheit. MAX MIN Toggle between MAX and MIN options. MAX or MIN reading is displayed on the secondary display. Turn off or on the laser. Turn off or on display backlight. � Laser To avoid injury, do not point the laser directly at eye or indirectly off reflective surfaces. The thermometer is equipped with a laser used for aiming purposes only. The laser turns off when the trigger is released. To enable or disable the laser: 1.
Distance and Spot Size As the distance (D) from the target being measured increases, the spot size (S) of the area measured by the instrument becomes larger. The spot size indicates 90% encircled energy. Field of view Make sure that the target is larger than the spot size. The smaller the target, the closer you should be to it.
Emissivity Emissivity describes the energy-emitting characteristics of materials. Most organic materials and painted or oxidized surfaces have an emissivity of about 0.95. If possible, to compensate for inaccurate readings that may result from measuring shiny metal surfaces, cover the surface to be measured with masking tape or flat black paint (<150°C / 302°F ) and use the high emissivity setting. Allow time for the tape or paint to reach the same temperatures as the surface beneath it.
SPECIFICATION Function Range Temperature Range 0°F to 716°F -18°C to 380°C Accuracy With ambient operating temperature of 21°C to 25°C (70°F to 77°F) -18°C to 10°C (-0.4°F to 50°F): ±2%+1°C (2°F), or ±3°C (±6°F), whichever is greater (Typical) >10°C to 380°C (>50°F to 716°F): ±2%, or ±2°C (±4°F), whichever is greater (Typical) Repeatability ±0.5% of reading or ±0.5°C (±1°F), whichever is greater (Typical) Display Resolution 0.1°C / 0.
MAINTENANCE Lens Cleaning: Blow off loose particles using clean compressed air. Gently brush remaining debris away with a camel’s hair brush. Carefully wipe the surface with a moist cotton swab. The swab may be moistened with water or rubbing alcohol. Note: Do not use solvents to clean the plastic lens. Case Cleaning: Use soap and water on a damp sponge or soft cloth. Note: Do not submerge the unit in water.
BATTERY REPLACEMENT To install or change one 9V battery (see below): 1. Open the handle. 2. Install the battery noting its correct polarity. 3. Close and lock the handle.
IR-710 IR-710-EUR Mode d’emploi 6/2015, 4279838 C ©2015 Amprobe Test Tools. Tous droits réservés. Imprimé en Chine.
Limites de garantie et de responsabilité Amprobe garantit l’absence de vices de matériaux et de fabrication de ce produit pendant une période d’un an prenant effet à la date d’achat, sauf disposition contraire prévue par la loi. Cette garantie ne s’applique pas aux fusibles, aux piles jetables ni à tout produit mal utilisé, modifié, contaminé, négligé ou endommagé par accident ou soumis à des conditions anormales d’utilisation et de manipulation.
TABLE DES MATIÈRES SYMBOLES...................................................................................................................2 CONSIGNES DE SÉCURITÉ...........................................................................................3 DÉBALLAGE ET INSPECTION.......................................................................................4 FONCTIONNALITÉS......................................................................................................
IR-710 / IR-710-EUR Thermomètre 10:1 1 2 4 8 5 6 10 Pile 9V 3 7 9 1 Ouverture laser 6 Unité de température °C / °F 2 Gâchette 7 Température MAX / MIN 3 Couvercle de pile 8 Rétroéclairage 4 Maintien d’affichage (après avoir relâché la gâchette) 9 Indicateur de pile faible 10 Établissement des mesures (en actionnant la gâchette) 5 Indicateur laser SYMBOLES � Attention ! Se reporter aux explications de ce manuel. Avertissement ! Lumière laser. Ne pas regarder dans le faisceau laser.
Consignes de sécurité L'instrument est conforme aux normes suivantes : Sécurité générale EN 61010-1 Sécurité laser EN 60825-1 Susceptibilité et émissions électromagnétiques EN 61326-1 Ouverture laser X�Avertissement : À lire avant l’emploi • Ne pas regarder dans le faisceau laser. • Ne pas pointer directement le laser en direction des yeux ou indirectement vers des surfaces réfléchissantes. • Utilisation réservée aux personnes compétentes.
Déballage et inspection Le carton d’emballage doit inclure les éléments suivants : 1 thermomètre IR-710 / IR-710-EUR 1 pile 9 V (installée) 1 Mode d’emploi Si l’un de ces éléments est endommagé ou manquant, renvoyez le contenu complet de l’emballage au lieu d’achat pour l’échanger.
Bouton Description °C °F Bascule entre les degrés Celsius et Fahrenheit. MAX MIN Bascule entre les options MAX et MIN. La lecture MAX ou MIN est affichée sur la fenêtre secondaire. Active ou désactive le laser. Active ou désactive le rétroéclairage. � Laser Pour éviter les blessures, ne pas pointer directement le laser en direction des yeux, ou indirectement vers des surfaces réfléchissantes. Le thermomètre est équipé d’un laser, celui-ci ne doit être utilisé que pour viser.
Distance et taille du point focal (spot) À mesure que la distance (D) de la cible mesurée augmente, la taille du point focal (S) de la zone mesurée par l’instrument grandit. La taille du point focal indique 90 % d'énergie circonscrite. Champ de visée Vérifiez que la cible est plus grande que la taille du point focal. Plus la cible est petite, plus il faut s'en rapprocher.
Émissivité L’émissivité décrit les caractéristiques d'émission d’énergie des matériaux. La plupart des matériaux organiques et des surfaces peintes ou oxydées ont une émissivité de 0,95. Le cas échéant, pour compenser les lectures inexactes susceptibles de résulter des mesures de surfaces métalliques brillantes, couvrez la surface à mesurer de ruban opaque ou de peinture matte noire (< 150 °C / 302 °F) et utiliser le paramètre de haute émissivité.
CARACTÉRISTIQUES Fonction Gamme Plage de températures -18 °C à 380 °C (0 °F à 716 °F) Précision avec une température ambiante de fonctionnement de 21 °C à 25 °C (70 °F à 77 °F) -18 °C à 10 °C (-0,4 °F à 50 °F) : ±2 %+1 °C (2 °F), ou ±3 °C (±6 °F), selon la valeur la plus grande (Typique) > 10 °C à 380 °C (> 50 °F à 716 °F) : ±2 %, ou ±2 °C (±4 °F), selon la valeur la plus grande (Typique) Fidélité des mesures ±0,5 % du résultat ou ±0,5 °C (±1 °F), selon la valeur la plus grande (Typique) Résolution
ENTRETIEN Nettoyage de l’objectif : Expulsez les impuretés en suspension avec de l’air comprimé sec et propre. Essuyez doucement les débris restants à l’aide d’un pinceau d’aquarelle. Essuyez soigneusement la surface avec un coton humide. Essuyez soigneusement la surface avec un coton-tige humide ou imbibé d'alcool. Remarque : Ne pas utiliser de solvants pour nettoyer la lentille en plastique. Nettoyage du boîtier : Utilisez de l’eau savonneuse sur une éponge humide ou un chiffon doux.
CHANGEMENT DES PILES Pour installer ou remplacer une pile de 9 V (voir ci-dessous) : 1. Ouvrez la poignée. 2. Installez la pile en notant sa polarité. 3. Fermez et verrouillez la poignée.
IR-710 IR-710-EUR Bedienungshandbuch 6/2015, 4279838 C ©2015 Amprobe Test Tools. Alle Rechte vorbehalten. Gedruckt in China.
Beschränkte Gewährleistung und Haftungsbeschränkung Es wird gewährleistet, dass dieses Amprobe-Produkt für die Dauer von einem Jahr ab dem Kaufdatum frei von Material- und Fertigungsdefekten ist, sofern örtliche Gesetze nichts anderes vorsehen. Diese Gewährleistung erstreckt sich nicht auf Sicherungen, Einwegbatterien oder Schäden durch Unfälle, Nachlässigkeit, Missbrauch, Änderungen oder abnormale Betriebsbedingungen bzw. unsachgemäße Handhabung.
INHALT SYMBOLE.....................................................................................................................2 SICHERHEITSINFORMATIONEN...................................................................................3 AUSPACKEN UND ÜBERPRÜFEN.................................................................................4 MERKMALE..................................................................................................................4 WIE DAS THERMOMETER FUNKTIONIERT.......
IR-710 / IR-710-EUR 10:1 IR-Thermometer 1 2 4 9-VBatterie 8 5 10 3 7 9 1 Laseröffnung 6 Temperatureinheit ° C / ° F 2 Auslöser 7 MAX/MIN-Temperatur 3 Batteriefachabdeckung 8 Anzeigenhintergrundbeleuchtung 4 Anzeige festhalten (nach Loslassen des Auslösers) 5 Laseranzeige 9 Anzeige für schwache Batterie 10 Messung durchführen (Auslöser ziehen) SYMBOLE � Vorsicht! Siehe Erklärung in diesem Handbuch. Warnung! Laserlicht. Nicht in den Laserstrahl blicken. °C Celsius. °F Fahrenheit.
Sicherheitsinformationen Das Messgerät stimmt überein mit: EN 61010-1 Allgemeine Sicherheit EN 60825-1 Lasersicherheit EN 61326-1 Elektromagnetische Störaussendungen und Empfindlichkeit Laseröppning X�Warnung: Vor Gebrauch lesen • • • • • • • • • • Nicht in Laserstrahl blicken. Laser nicht direkt auf Auge oder indirekt reflektierende Flächen richten. Ausschließlich für Gebrauch durch fachkundiges Personal. Die Batterien ersetzen, sobald die Anzeige für schwache Batterie eingeblendet wird.
Auspacken und Überprüfen Der Verpackungskarton sollte Folgendes enthalten: 1 IR-710 / IR-710-EUR Thermometer 1 9 V Batterie (installiert) 1 Bedienungshandbuch Wenn einer dieser Artikel beschädigt ist oder fehlt, die gesamte Lieferung zwecks Ersatz an die Verkaufsstelle zurücksenden.
Taste Beschreibung. °C °F Umschalten zwischen Celsius und Fahrenheit. MAX MIN Umschalten zwischen MAX und MIN. MAX- bzw. MIN-Messwert wird auf der sekundären Anzeige angezeigt. Ausschalten bzw. Einschalten des Lasers. Ausschalten bzw. Einschalten des Hintergrundbeleuchtung. � Laser Zur Vermeidung von Verletzungen Laser nicht direkt auf Auge oder indirekt reflektierende Flächen richten. Das Thermometer ist mit einem Laser ausgestattet, der ausschließlich zum Zielen auf das Objekt verwendet wird.
Abstand und Punktgröße Die Punktgröße (S) des gemessenen Bereichs wird mit zunehmendem Abstand (D) des Messgeräts vom gemessenen Ziel größer. Die Punktgröße gibt 90 % umfassender Energie an. Sichtfeld Sicherstellen, dass das Ziel größer ist als die Punktgröße. Je kleiner das Ziel ist, desto näher soll das Gerät gehalten werden.
Emissivität Emissivität beschreibt die Energie emittierenden Eigenschaften von Stoffen. Die meisten organischen Stoffe und bemalten oder oxidierten Flächen weisen einen Emissionswert von ungefähr 0,95 auf. Zur Kompensation von ungenauen Messwerten, die beim Messen von glänzenden Metallflächen auftreten können, die zu messende Fläche, wenn möglich, mit Abdeckband oder matter schwarzer Farbe bedecken (< 150 °C / 302 °F) und die hohe Emissivitätseinstellung verwenden. Zeit einräumen, sodass das Abdeckband bzw.
TECHNISCHE DATEN Funktion Bereich Temperaturbereich -18 °C bis 380 °C 0 °F bis 716 °F Genauigkeit mit Umgebungsbetriebstemperatur von 21 °C bis 25 °C (70 °F bis 77 °F) -18 °C bis 10 °C (-0,4 °F bis 50 °F): ±2 %+1 °C (2 °F) bzw. ±3 °C (±6 °F), es gilt der größere Wert (Typisch) >10 °C bis 380 °C (> 50 °F bis 716 °F): ±2 % bzw. ±2 °C (±4 °F), es gilt der größere Wert (Typisch) Wiederholbarkeit ±0,5 % von Messwert bzw.
WARTUNG Linsenreinigung: Lose Partikel mit sauberer Druckluft abblasen. Verbleibende Verunreinigungen mit einer Kamelhaarbürste behutsam abbürsten. Die Oberfläche mit einem angefeuchteten Baumwolllappen sorgfältig abwischen. Der Lappen kann mit Wasser oder Reinigungsalkohol angefeuchtet werden. Hinweis: Keine Lösungsmittel zur Reinigung der Kunststofflinse verwenden. Gehäusereinigung: Seife und Wasser an einem feuchten Schwamm oder weichen Tuch verwenden. Hinweis: Das Gerät nicht in Wasser eintauchen.
ERSETZEN DER BATTERIE Einsetzen bzw. Wechseln der 9-V-Batterie (siehe unten): 1. Den Griff öffnen. 2. Auf die richtige Polarität achten und die Batterie einsetzen. 3. Den Griff schließen und verriegeln.
IR-710 IR-710-EUR Manuale d’uso 6/2015, 4279838 C ©2015 Amprobe Test Tools. Tutti i diritti riservati. Stampato in Cina.
Garanzia limitata e limitazione di responsabilità Questo prodotto Amprobe sarà esente da difetti di materiale e fabbricazione per un anno a decorrere dalla data di acquisto se non specificato diversamente dalle leggi locali. Sono esclusi da questa garanzia i fusibili, le pile monouso e i danni causati da incidenti, negligenza, uso improprio, alterazione, contaminazione o condizioni anomale di funzionamento o manipolazione.
INDICE SIMBOLI.......................................................................................................................2 INFORMAZIONI SULLA SICUREZZA............................................................................3 DISIMBALLAGGIO E ISPEZIONE..................................................................................4 CARATTERISTICHE.......................................................................................................
IR-710 / IR-710-EUR – Termometro IR 10:1 1 2 4 10 Pila da 9V 3 7 9 1 Apertura laser 2 Pulsante di misura 6 Unità di misura della temperatura °C / °F 3 Coperchio scomparto pila 7 Temperatura MAX / MIN 4 Tenuta dati sul display (dopo aver rilasciato il pulsante a grilletto) 8 Retroilluminazione display 5 Indicazione laser 10 Esecuzione della misura (pulsante premuto) 9 Indicazione di bassa carica delle pile SIMBOLI � Attenzione. Vedere la spiegazione nel manuale. Avvertenza Luce laser.
Informazioni sulla sicurezza Lo strumento è conforme alle seguenti norme: EN 61010-1 – Sicurezza generale EN 60825-1 – Sicurezza laser EN 61326-1 – Emissioni elettromagnetiche e suscettibilità Apertura laser X�Avvertenza. Leggere prima dell’uso. • Non tenere lo sguardo fisso sul fascio laser. • Non dirigere il fascio laser verso gli occhi, né direttamente, né indirettamente tramite superfici riflettenti. • Solo per l’uso da parte di persone competenti.
Disimballaggio e ispezione Contenuto della confezione: 1 Termometro IR-710 / IR-710-EUR 1 Pila da 9 V (installata) 1 Manuale d’uso Se uno di questi articoli è danneggiato o manca, restituire l’intera confezione al punto di acquisto perché venga sostituita.
Pulsante Descrizione °C °F Seleziona alternativamente Celsius o Fahrenheit. MAX MIN Seleziona alternativamente la lettura MAX o MIN, che viene visualizzata sul display secondario. Accende o spegne il laser. Attiva o disattiva la retroilluminazione. � Laser Per prevenire infortuni, non dirigere il fascio laser verso gli occhi, né direttamente, né indirettamente tramite superfici riflettenti. Il termometro è dotato di un laser, che serve solo per il puntamento.
Rapporto distanza-diametro spot All’aumentare della distanza (D) dalla superficie di cui si vuole misurare la temperatura, il diametro dello spot (S) misurato aumenta; tale diametro corrisponde al 90% dell'energia racchiusa. Campo visivo Accertarsi che l’oggetto su cui eseguire la misura sia più grande del diametro dello spot; quanto più piccolo è il punto di misura, tanto più vicini occorre essere.
Emissività L’emissività descrive le caratteristiche di emissione dell’energia dei materiali. L’emissività della maggior parte dei materiali organici e delle superfici verniciate o ossidate è pari a circa 0,95. Se possibile, per compensare l’imprecisione delle letture che può derivare dalla misura della temperatura di superfici metalliche lucide, coprire la superficie con nastro per mascheratura o vernice nera opaca (< 150 °C / 302 °F) e usare l’impostazione di alta emissività.
DATI TECNICI Funzione Intervallo Portata di temperatura Da -18 a 380 °C (0 - 716 °F) Precisione a temperatura ambiente compresa tra 21 °C e 25 °C (70 °F – 77 °F) Da -18 a 10 °C (da -0,4 a 50 °F): ±2%+1 °C (2 °F) o ±3 °C (±6 °F), il valore maggiore dei due (Tipico); da oltre 10 °C a 380 °C (> 50 °F a 716 °F): ±2% o ±2 °C (±4 °F), il valore maggiore dei due (Tipico) Ripetibilità ±0,5% della lettura o ±0,5 °C (±1 °F), il valore maggiore dei due (Tipico) Risoluzione del display 0,1 °C / 0,1 °F Rispost
MANUTENZIONE Pulizia della lente – Ripulire la lente dalle particelle non attaccate usando aria compressa pulita. Eliminare le particelle rimaste passando delicatamente sulla lente un pennello con setole di cammello. Passare con cautela sulla superficie un tamponcino di cotone inumidito con acqua o alcol disinfettante. Nota: non utilizzare solventi per pulire la lente di plastica. Pulizia dell’involucro – Usare una spugna o un panno morbido inumiditi con acqua e sapone.
SOSTITUZIONE DELLA PILA Per installare o sostituire la pila da 9 V, procedere come segue: 1. Aprire l’impugnatura. 2. Inserire la pila, osservando la giusta polarità. 3. Chiudere e bloccare l’impugnatura. Pila: alcalina 6F22 da 9 V o equivalente.
IR-710 IR-710-EUR Manual de uso 6/2015, 4279838 C ©2015 Amprobe Test Tools. Reservados todos los derechos. Impreso en China.
Garantía limitada y limitación de responsabilidades Su producto de Amprobe está garantizado contra defectos de material y mano de obra durante 1 año a partir de la fecha de compra, salvo que la legislación de su país estipule lo contrario. Esta garantía no cubre fusibles, baterías desechables, ni daños derivados de accidentes, negligencia, uso indebido, alteración, contaminación o condiciones anormales de uso o manipulación.
ÍNDICE SÍMBOLOS....................................................................................................................2 INFORMACIÓN DE SEGURIDAD..................................................................................3 DESEMBALAJE E INSPECCIÓN.....................................................................................4 FUNCIONES..................................................................................................................4 CÓMO FUNCIONA EL TERMÓMETRO........
IR-710 / IR-710-EUR: Termómetro IR 10:1 1 2 4 10 Batería de 9 V 3 7 9 1 Apertura del láser 6 Unidad de temperatura °C / °F 2 Gatillo 7 Temperatura MAX / MIN 3 Cubierta de la batería 8 Retroiluminación de la pantalla 4 Retención en pantalla (tras soltar el gatillo) 5 Indicador láser 9 Indicador de batería baja 10 Realización de medidas (apretando el gatillo) SÍMBOLOS � ¡Precaución! Consulte la explicación incluida en este manual. ¡Advertencia! Luz láser. No mire directamente al haz láser.
Información de seguridad El instrumento cumple la siguiente normativa: EN 61010-1, seguridad general EN 60825-1, seguridad de láser EN 61326-1, emisiones y susceptibilidad electromagnética Abertura del láser X�Advertencia: Lea lo siguiente antes de usar el producto • No mire directamente al haz láser. • No apunte con el láser directamente a los ojos ni de forma indirecta por medio de superficies reflectantes. • Para uso exclusivo por personal competente.
Desembalaje e inspección La caja del producto debe contener lo siguiente: 1 Termómetro IR-710 / IR-710-EUR 1 Batería de 9 V (instalada) 1 Manual de uso Si alguno de los artículos está dañado o no está en la caja, devuelva el producto completo a la tienda donde lo compró para cambiarlo.
Botón Descripción °C °F Alterna entre grados centígrados y Fahrenheit. MAX MIN Alterna entra las opciones MAX y MIN. La lectura del valor MAX o MIN aparece en la pantalla secundaria. Enciende y apaga el láser. Enciende y apaga la retroiluminación de la pantalla. � Láser Para evitar lesiones, no apunte con el láser directamente a los ojos ni de forma indirecta por medio de superficies reflectantes. El termómetro está equipado con láser; utilícelo exclusiva-mente para apuntar.
Distancia y tamaño de punto A medida que aumenta la distancia (D) desde el objetivo medido, se agranda el tamaño del punto (S) del área medida por el instrumento. El tamaño del punto indica el 90 % de la energía incluida en el círculo. Campo visual Asegúrese de que el objetivo medido sea mayor que el tamaño del punto. Cuanto menor sea el objetivo, más cerca del objeto deberá situarse.
Emisividad La emisividad describe las características de emisión de energía de los materiales. La mayoría de los materiales orgánicos y las superficies pintadas u oxidadas tienen una emisividad de 0,95. Si es posible, para compensar la inexactitud en las lecturas resultante de medir superficies metálicas brillantes, cubra con cinta de pintor o con pintura negra mate la superficie que se va a medir (< 150 °C / 302 °F) y utilice el ajuste de alta emisividad.
ESPECIFICACIONES Función Rango Rango de temperatura 0 °F a 716 °F -18 °C a 380 °C Exactitud con temperatura ambiente de 21 °C a 25 °C (70 °F a 77 °F) -18 °C a 10 °C (-0,4 °F a 50 °F): ±2 % + 1 °C (2 °F), o ±3 °C (±6 °F), el valor mayor de los dos (Típico) > 10 °C a 380 °C (> 50 °F a 716 °F): ±2 % o ±2 °C (±4 °F), el valor mayor de los dos (Típico) Repetibilidad ±0,5 % de la lectura o ±0,5 °C (±1 °F), el valor mayor de los dos (Típico) Resolución de la pantalla 0,1 °C / 0,1 °F Respuesta espectral
MANTENIMIENTO Limpieza de la lente: Utilice aire comprimido limpio para retirar partículas sueltas. Utilice un cepillo de pelo de camello para quitar con cuidado la suciedad residual. Frote suavemente la superficie con un bastoncillo de algodón humedecido. El bastoncillo puede humedecerse con agua o con alcohol isopropílico. Nota: No utilice disolventes para limpiar la lente de plástico. Limpieza de la caja: Utilice jabón y agua con una esponja húmeda o un paño suave. Nota: No sumerja la unidad en agua.
CAMBIO DE LA BATERÍA Para instalar o cambiar una batería de 9 V (vea las instrucciones a continuación): 1. Abra el mango. 2. Instale la batería, con cuidado de aplicar la polaridad correcta. 3. Cierre y bloquee el mango.
IR-710 IR-710-EUR Användarhandbok 6/2015, 4279838 C ©2015 Amprobe Test Tools. Med ensamrätt. Tryckt i Kina.
Begränsad garanti och ansvarsbegränsning Denna Amprobe-produkt garanteras vara fri från felaktigheter i material och utförande i ett år från inköpsdatum om detta inte avviker från lokal lagstiftning. Denna garanti innefattar inte säkringar och engångsbatterier, och inte heller skador som uppkommer som en följd av olyckshändelser, försummelse, felaktig användning, ändring, förorening eller onormala förhållanden eller onormal hantering.
INNEHÅLL SYMBOLER...................................................................................................................2 SÄKERHETSINFORMATION.........................................................................................3 UPPACKNING OCH INSPEKTION.................................................................................4 FUNKTIONER................................................................................................................4 HUR TERMOMETRARNA FUNGERAR.........
IR-710 / IR-710-EUR 10:1 IR-termometer 1 2 4 9-VBatterie 10 3 7 9 1 Laseröppning 6 Temperaturenhet °C / °F 2 Avtryckare 7 MAX/MIN-temperatur 3 Batterilucka 8 Bakgrundsbelysning 4 Låst visning (Efter att ha släppt avtryckaren) 5 Laserindikator 9 Indikator om svagt batteri 10 Göra en mätning (Trycka på avtryckaren) SYMBOLER � Varning! Se förklaringen i denna handbok. Varning! Laserljus. Titta inte in i laserstrålen. °C Celsius. °F Fahrenheit. Batteriindikation.
Säkerhetsinformation Instrumentet uppfyller kraven enligt: EN 61010-1 General Safety EN 60825-1 Laser Safety EN 61326-1 Elektrisk utrustning för mätning, styrning och för laboratorieändamål Laseröppning X�Varning: Läs innan användning • • • • • • • • • • Titta inte in i laserstrålen. Rikta inte lasern direkt mot ögon eller indirekt mot reflektiva ytor. Får endast användas av kompetent personal. Byt ut batterierna så snart som ikonen för låg batteriladdning visas.
Uppackning och inspektion Din kartong ska innehålla: 1 1 1 IR-710 / IR-710-EUR Termometer 9 V-batteri (monterat) Användarhandbok Om någon av de här artiklarna är skadade eller saknas ska du returnera hela paketet till inköpsstället för utbyte. FUNKTIONER Den infraröda termometern Amprobe IR-710 / IR-710-EUR, med förhållandet 10:1 mellan avstånd och mätpunkt, erbjuder bästa möjliga noggrannhet och svarstid med ett temperaturmätområde från 0°F till 716 °F eller -18 °C till 380 °C.
Knapp Beskrivning. °C °F Växlar mellan Celsius och Fahrenheit. MAX MIN Växlar mellan alternativen MAX och MIN. MAX- eller MINavläsningen visas i det andra teckenfönstret. Stäng av eller slå på lasern. Stäng av eller slå på teckenfönstrets bakgrundsbelysning. � Laser För att undvika skada ska du inte rikta lasern direkt mot ögon eller indirekt mot reflektiva ytor. Om termometern är utrustad med en laser ska denna endast användas för att rikta termometern. Lasern stängs av när avtryckaren släpps.
Avstånd och punktstorlek Efterhand som avståndet (D) från den plats som mäts ökar blir platsens storlek (S) större för det område som instrumentet mäter. Punktstorleken visar 90 % inringad energi. Synfält Kontrollera att det mål som ska mätas är större än punktstorleken. Ju mindre mål, desto närmare målet måste du vara.
Strålningstal Strålningstal anger materialets energiavgivningsegenskaper. De flesta organiska material och målade eller oxiderade ytor har ett strålningstal omkring 0,95. För att kompensera för felaktiga värden som kan uppstå vid mätning av blanka metallytor kan den yta som ska mätas om möjligt täckas med maskeringstejp eller matt svart färg (< 150 °C / 302 °F) och använd den inställningen för högt strålningstal. Vänta en stund tills tejpen eller färgen har nått samma temperatur som den underliggande ytan.
SPECIFIKATIONER Funktion Område Temperaturområde 0 °F till 716 °F -18 °C till 380 °C Noggrannhet med omgivande driftstemperatur från 21 °C till 25 °C (70 °F till 77 °F) -18 °C till 10 °C (-0,4 °F till 50 °F): ±2 %+1 °C (2 °F), eller ±3 °C (±6 °F), beroende på vilket som är störst (Typisk) >10 °C till 380 °C (> 50 °F till 716°F): ±2 %, eller ±2 °C (±4 °F), beroende på vilket som är störst (Typisk) Repeterbarhet ±0,5 % av avläsningen eller ±0,5 °C (±1 °F), beroende på vilket som är störst (Typisk) Tec
UNDERHÅLL Rengöring av objektivet: Blås bort lösa partiklar med ren, komprimerad luft. Borsta försiktigt bort allt återstående skräp med en kamelhårspensel. Torka försiktigt ytan med fuktad bomullsvadd. Vadden kan fuktas med vatten eller tvättsprit. Obs! Använd inte lösningsmedel för att rengöra plastobjektivet. Rengöring av kåpan: Använd en svamp eller mjuk duk som fuktats med tvål och vatten. Obs! Sänk inte ned enheten i vatten.
BYTA BATTERI Installation eller byte av ett 9 V-batteri (se nedan): 1. Öppna handtaget. 2. Installera batteriet notera att det har rätt polaritet. 3. Stäng och lås handtaget.
Visit www.Amprobe.com for • • • • Catalog Application notes Product specifications User manuals Amprobe® www.Amprobe.com info@amprobe.com Everett, WA 98203 Tel: 877-AMPROBE (267-7623) Amprobe® Europe Beha-Amprobe In den Engematten 14 79286 Glottertal, Germany Tel.