Datasheet

ManualsBrandsBeha-Amprobe ManualsClamp MetersSwivel Clamp Meter, TRMS, 40MOhm, LCD

www.beha-amprobe.com

The patented rotating head clamp design allows easy viewing of measurements

in tight or inconvenient to reach places. Simply rotate the body of the meter to

get an unobstructed view of the LCD display. Rich set of features and CAT III 600V

safety reading for use in electrical and HVAC applications.

ACD-23SW Swivel

™

Clamp

Meter with True-rms

Easily view measurements in hard to reach places

ACD-23SW SPECIFICATIONS

Speciﬁcations ACD-23SW

Display 3¾ digit liquid crystal display (LCD) with a maximum reading of 3999.

Polarity Automatic, positive implied, negative polarity indication.

Overrange (OL) or (-OL) is displayed.

Zero Automatic.

Low battery indication The “

“ is displayed when the battery voltage drops below the operating level.

Auto power off Approximately 10 minutes.

Measurement rate 2 times per second, nominal.

Operating Environment 0°C to 50°C / 32°F to 122°F at <70% relative humidity

Storage Ttemperature -20°C to 60° / -4°F to 140°F, 0 to 80% R.H. with battery removed from meter.

Accuracy Stated accuracy at 74°F ±8°F, <75% relative humidity

Temperature Coefﬁcient 0.1 × (speciﬁed accuracy) per °F, (32°F to 66°F, 82°F to 122°F).

Altitude 6561.7 Feet (2000m).

Jaw opening capability 30mm (1.18 in) conductor.

Power 1.5 volt battery x2, R03/SIZE AAA. Isolated battery compartment

Battery life 150 hours typical with carbon-zinc. 300 hours typical with alkaline

Dimensions Approximately 157g (1.26lb) including battery.

Weight 2 times per second, nominal.

Safety

Designed to meet IEC 61010-1 (EN61010-1) and IEC 61010-2-032 (EN61010-2-032), CATIII 600V class II

and pollution degree 2 indoor use comply with CE , UL

For more detailed speciﬁcations see users manual.

• TRMS Measurement

• 180 degree rotating head for the perfect

display viewing

• Advanced VoltTect non-contact voltage

detection

• Slim jaw design with one hand operation

• Measures AC Current up to 400 ACA, AC/

DC, Voltage up to 600V, Resistance and

Capacitance

• Temperature measurement

• Audible continuity

• Auto and manual ranging respectively for

quick checks and precise measurements

• Auto power off

• Data hold

• Accommodates conductors up to 1.18”

(30mm) in diameter

• Safety CAT III 600 V

• Test leads, battery (installed), Users

Manual, Carrying Case and type-K

thermocouple are included with the

product

For detailed speciﬁcations and ordering info go to www.beha-amprobe.com

Summary of content (3 pages)

PAGE 1
www.beha-amprobe.com ACD-23SW Swivel™ Clamp Meter with True-rms Easily view measurements in hard to reach places The patented rotating head clamp design allows easy viewing of measurements in tight or inconvenient to reach places. Simply rotate the body of the meter to get an unobstructed view of the LCD display. Rich set of features and CAT III 600V safety reading for use in electrical and HVAC applications.
PAGE 2
www.beha-amprobe.com ACD-23SW ELECTRICAL SPECIFICATIONS DC Volts Ranges Resolution Accuracy Input Impedance Overload Protection 400mV, 4V, 40V, 400V, 600V 0.1mV ±(0.5% rdg + 2 dgts) 400mV:>100MΩ; 4V:10MΩ;40V~600V:9.1MΩ 600V DC or AC rms to measure millivolts, use “RANGE “ button to manually select 400mV range AC Volts (50Hz - 500Hz) Ranges Resolution Accuracy Input Impedance Overload Protection 4V, 40V, 400V, 600V 1mV ±(1.2% rdg + 5 dgts) ±(2% rdg + 5 dgts) on 600V range 4V:10MΩ;40V~600V:9.
PAGE 3
www.beha-amprobe.com ACD-23SW ELECTRICAL SPECIFICATIONS Continuity Ranges Resolution Audible Indication Response Time Overload Protection Non-Contact Voltage Indicator 400Ω 1Ω Less than 25Ω 500ms 500V DC or AC rms Senses voltage 70V to 600VAC (50Hz ~ 60Hz), beeper chirps and big bright red LED comes on, works when meter dial is on any range. Auxiliary Features Hold Range Disable Auto Power Off Freeze the latest reading on the display. Excute manual range mode.