Datasheet

ManualsBrandsBeha-Amprobe ManualsClamp MetersPower Clamp Meter, 1000kW, 10kHz, 4000uF

www.beha-amprobe.com

Complete with a full range of diagnostic capabilities including phase sequence,

power and power factor, total harmonics distortion and individual harmonics, inrush

current and low pass ﬁlter, the Beha-Amprobe Navigator Clamp serves as a ﬁrst line

of defense for spot checking and verifying system conditions before deploying

more specialized tools -- or incurring additional costs. It is rated CAT IV 600 V, CAT

III 1000 V meter with voltage measurement up to 1000 V AC/DC. The innovative

navigation system eliminates confusing push buttons, and replaces them with a

single joystick allowing the user to select functions directly on the display.

It’s all about easy and reliable measurements. Amprobe’s new line of Navigator clamp meters feature quick, easy

to use single hand selection of measurements. The joy stick control allows quick selection of measurement features

on the display from MAX/MIN to power factor to AC/DC, with many more available. Simply highlight the desired

measurement feature using the joy stick and press to select. Rugged and CAT IV reliable, these units also feature, super

bright backlight display, built-in jaw ﬂashlight and overmold bodies to absorb shock -- all you need for commercial and

industrial environments.

Individual Models and Descriptions:

ACD-50NAV 600A AC Navigator Clamp

ACD-51NAV 600A AC TRMS Navigator Clamp

ACD-52NAV 600A AC / DC TRMS Navigator Clamp

ACD-53NAV 1000A AC TRMS Navigator Clamp

ACD-54NAV 1000A AC / DC TRMS Navigator Clamp

CAT IV Navigator

™

Clamps Meters

Easy to use navigation for precise measurements

CAT IV NAVIGATOR

™

CLAMPS METERS

• TRMS Measurement

• Measurements

1. Voltage up to 1000 V AC/DC, resistance, frequency, THD

(Total Harmonics Distortion) and individual harmonics

form 1 to 25, power, power factor

2. AC Current

- Up to 600 A (ACD-50NAV, ACD-51NAV, ACDC-52NAV)

- Up to 1000 A (ACD-53NAV, ACDC-54NAV)

3. DC Current

- Up to 600 A (ACDC-52NAV)

- Up to 1000 A (ACDC-54NAV)

4. Capacitance

5. Temperature measurement in °C or °F (ACD-51NAV,

ACDC-54NAV only) - Temp. adapter and probe included

6. DC micro amps (ACD-51NAV only)

• Maximum jaw opening

- 1.45” (37mm): ACD-50NAV, ACD-51NAV, ACDC-52NAV

- 1.77” (45mm): ACD-53NAV, ACDC-54NAV

• Phase rotation indication

• Non-contact voltage detection

• Continuity Beeper

• Min, Max and Smart Data Hold

• Auto torch-light when clamping

• Inrush current measurement for motors

• Peak hold

• Low pass ﬁlter for variable frequency drives

• Large 10,000 count display with active backlight and

analog bar graph

• Auto Power Off

• 4 feet drop proof

• Deluxe carrying case Included

• CAT IV 600 V /CAT III 1000 V safety standard

For detailed speciﬁcations and ordering info go to www.beha-amprobe.com

Summary of content (2 pages)

PAGE 1
www.beha-amprobe.com CAT IV Navigator™ Clamps Meters Easy to use navigation for precise measurements Complete with a full range of diagnostic capabilities including phase sequence, power and power factor, total harmonics distortion and individual harmonics, inrush current and low pass filter, the Beha-Amprobe Navigator Clamp serves as a first line of defense for spot checking and verifying system conditions before deploying more specialized tools -- or incurring additional costs.
PAGE 2
www.beha-amprobe.com CAT IV NAVIGATOR™ CLAMPS METERS GENERAL SPECIFICATIONS Feature ACD-50NAV AC Current ACD-51NAV ACDC-52NAV ACD-53NAV 100.0, 600.0A ACDC-54NAV 100.0, 1000A DC Current 100.0, 600.0A AC Voltage 100.0V, 1000V ±(1.0% Rdg + 5 LSD) DC Voltage 100.0V, 1000V ±(0.7% Rdg + 2 LSD) Resistance 1.000KΩ, 10.00KΩ, 100.0KΩ ±(1.0% Rdg + 3 LSD) Frequency 20.0Hz to 10KHz ±(0.5% Rdg +3 LSD) Capacitance 400.0μF, 4.000mF ±(1.