Operation Manual

10 REFERENCE AMPLIFIER A500 Bedienungsanleitung
5. Technische Daten
Output Power
RMS Power
Stereo Mode (both channels driven)
8 Ω / 1 kHz @ 1 % THD 125 W
4 Ω / 1 kHz @ 1 % THD 185 W
Bridged Mono
8 Ω / 1 kHz @ 1 % THD 375 W
Peak Power
Stereo Mode (both channels driven)
8 Ω / 1 kHz 175 W
4 Ω / 1 kHz 300 W
Bridged Mono
8 Ω / 1 kHz 600 W
Input Sensitivity 1.64 V
Distortion <0.01 %
Frequency Response 20 Hz - 20 kHz, +0/-1 dB
Voltage Gain: 26 dB
Damping Factor > 220 @ 8 Ω
Input impedance 10 kΩ unbalanced, 20 kΩ balanced
Signal-to-Noise >100 dBA
Controls
Front POWER switch
GAIN control (channel 1 and 2)
Rear MODE switch
Indicators
POWER Blue LEDs
CLIP (per channel) Red LEDs
PROT (per channel) Yellow LEDs
SIGNAL (per channel) Green LEDs
-30 dB ~ -6 dB
SIGNAL (per channel) Yellow LEDs
-3 dB; 0 dB
Connectors
Inputs Balanced XLR, ¼" TRS , RCA
Outputs ¼"TS connectors and ”touch -proof”
binding posts
Circuit protection
Cooling Convection-type
Amplier protection Short circuit and overload
Output circuit type Class AB
Power supply / Voltage (Fuses)
USA / Canada 120 V~, 60 Hz (T 10 A H 250 V)
UK / Australia 240 V~, 50 Hz (T 5 A H 250 V)
Europe 230 V~, 50 Hz (T 5 A H 250 V)
Japan 100 V~, 50-60 Hz (T 10 A H 250 V)
Power consumption 660 W
Mains connector Standard IEC receptacle
Dimensions/Weight
Dimensions (H x W x D) 482.6 x 257.5 x 101.6 mm
19 x 10.14 x 4"
Weight 19.4 Ibs / 8.8 kg
Die Fa. BEHRINGER ist stets bemüht, den höchsten Qualitätsstandard zu sichern. Erforderliche Modifikationen
werden ohne vorherige Ankündigung vorgenommen. Technische Daten und Erscheinungsbild des Gerätes
können daher von den genannten Angaben oder Abbildungen abweichen.