User Manual TUBE ULTRAGAIN MIC100 Audiophile Vacuum Tube Preamplifier with Limiter
TUBE ULTRAGAIN MIC100 User Manual Table of Contents Thank you............................................................................................. 2 Important Safety Instructions............................................................ 3 1. Introduction..................................................................................... 6 1.1 The design concept....................................................................................... 6 1.2 Online registration......................
TUBE ULTRAGAIN MIC100 User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
TUBE ULTRAGAIN MIC100 User Manual Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A groundingtype plug has two blades and a third grounding prong.
TUBE ULTRAGAIN MIC100 User Manual Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE).
TUBE ULTRAGAIN MIC100 User Manual 1. Introduction With the MIC100, you have purchased an extremely musical mic preamp that is equipped with a 12AX7 vacuum tube. An integrated limiter, a phase reverse function, phantom power supply, a highly accurate LED meter and a switchable pad function complement this powerful device. 1.1 The design concept The heart of the TUBE ULTRAGAIN is an extremely low-noise microphone preamp circuitry that uses discrete components and produces a highly trans-parent sound.
TUBE ULTRAGAIN MIC100 User Manual 1.2 Online registration Please register your new BEHRINGER equipment right after your purchase by visiting behringer.com and read the terms and conditions of our warranty carefully. Should your BEHRINGER product malfunction, it is our intention to have it repaired as quickly as possible. To arrange for warranty service, please contact the BEHRINGER retailer from whom the equipment was purchased.
TUBE ULTRAGAIN MIC100 User Manual 2. Control Elements (1) (2) (3) (4) (5) Fig. 2.1: Side panel of the MIC100 2.1 Connections (Side Panel) (1) Use the POWER SUPPLY CONNECTOR to hook up the enclosed power supply unit. Next to this connector you’ll find the strain relief clamp, which prevents accidental release of the power supply. (2) This is the balanced XLR OUTPUT of your MIC100. Use this connector to feed the XLR input of your mixing console, multitrack recorder or power amp.
TUBE ULTRAGAIN MIC100 User Manual 2.2 User interface (6) (7) (9) (10) (11) (12) (8) (13) Fig. 2.
TUBE ULTRAGAIN MIC100 User Manual (6) The GAIN control allows applying gain from +26 to +60 dB to the input signal. This control should be set fully counterclockwise when (dis)connecting a sound source to the MIC100. When all connections are made, slowly start raising gain. (7) We recommend using the LED meter to adjust gain. The LED chain displays the output signal level in dB. Please make sure that the clip LED never lights up permanently.
TUBE ULTRAGAIN MIC100 User Manual 3. Wiring Examples You’ll be surprised how flexibly you can set up your MIC100. The following chapter describes some typical wiring examples. 3.1 Enhancing vocals and instruments in live applications Here, the MIC100 is wired before the mixer’s channel input. Thus, the sound gains in warmth and transparency. Due to the integrated limiter, distortion is eliminated effectively. XLR-input Fig. 3.
TUBE ULTRAGAIN MIC100 User Manual 3.2 “Direct to Disk” application in studio or home recording environments If you are looking for a device that considerably enhances the sound of your digital workstation, this is where the MIC100 comes in. Many hard disk recorders lack a certain “liveliness”. In addition, they are often equipped with “lousy” microphone preamps. Such problems can be solved perfectly with the MIC100. XLR input ¼" TRS output Fig. 3.
TUBE ULTRAGAIN MIC100 User Manual 3.3 The MIC100 as DI-box Your MIC100 is excellently suited for this application. For example, you can connect an unbalanced acoustic guitar signal to the MIC100 to prevent hum or interference noise. What you get is a balanced, noise-free signal. ¼" TRS output ¼" TRS input XLR output Insert Microphone input Fig. 3.
TUBE ULTRAGAIN MIC100 User Manual 4. Audio Connectors Balanced use with XLR connectors 2 1 3 1 2 3 input output 1 = ground/shield 2 = hot (+ve) 3 = cold (-ve) For unbalanced use, pin 1 and pin 3 have to be bridged Fig. 4.1: XLR connectors Unbalanced ¼" TS connector strain relief clamp sleeve tip sleeve (ground/shield) tip (signal) Fig. 4.
TUBE ULTRAGAIN MIC100 User Manual Balanced ¼" TRS connector strain relief clamp sleeve ring tip sleeve ground/shield ring cold (-ve) tip hot (+ve) For connection of balanced and unbalanced plugs, ring and sleeve have to be bridged at the stereo plug. Fig. 4.
TUBE ULTRAGAIN MIC100 User Manual 5. Specifications XLR Input Connector balanced/unbalanced Type transformerless, DC-decoupled input Impedance approx. 2 kΩ Max. input level +7 dBu / -20 dB with pad ¼" TRS Input Connector balanced/unbalanced Type transformerless, DC-decoupled input Impedance approx. 1 MΩ Max. input level +16 dBu / -20 dB with pad Audio Outputs Connectors XLR connector + ¼" TRS jack balanced/unbalanced Type transformerless, DC-decoupled output Impedance approx.
TUBE ULTRAGAIN MIC100 User Manual Frequency Response Mic input <10 Hz to 43 kHz (±3 dB) Line input <10 Hz to 40 kHz (±3 dB) Function Controls GAIN variable (+26 dB to +60 dB) OUTPUT variable (-∞ to +10 dB) Function Switches 20 dB PAD level attenuation (20 dB) +48 V activates the phantom power PHASE REVERSE Phase reverse (180°) LIMITER limits the output signal Indicators Input Level 8-segment LED meter: -24, -18, -12, -6, 0, +6, +12, Clip Power LED indicates operation
TUBE ULTRAGAIN MIC100 User Manual Power Supply Adapter PSU Mains Voltage USA/Canada 120 V~, 60 Hz Europe/U.K./Australia 230 V~, 50 Hz China 220 V~, 50 Hz Korea 220 V~, 60 Hz Japan 100 V~, 50 / 60 Hz Physical/Weight Dimensions (H x W x D) 64 x 135 x 135 mm (2.5 x 5.3 x 5.3") Weight (without power supply) 1 kg (2.2 lbs) BEHRINGER is constantly striving to maintain the highest professional standards.
We Hear You