Version 1.
PRO MIXER VMX100 IMPORTANT SAFETY INSTRUCTIONS DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. CAUTION: WARNING: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture.
PRO MIXER VMX100 FOREWORD Dear Customer, Welcome to the team of PRO MIXER users and thank you for demonstrating your faith in us by purchasing the BEHRINGER VMX100. Writing this foreword to you is an extremely pleasant task. After several months of intensive brainstorming and the subsequent realization of their ideas, our engineers finally achieved an ambitious goal: the construction of an outstanding DJ MIXER, which, due to its remarkable functions, provides maximum flexibility and impressive performance.
PRO MIXER VMX100 PRO MIXER Professional 2-channel DJ mixer with BPM Counter s Super-smooth ULTRAGLIDE faders with up to 500,000 life cycles s Crossfader curve control s Gain and 2-band kill EQ (-32 dB) per channel s Extremely precise assignable level meter with peak hold function VMX100 s Intelligent dual auto-BPM counter with time and beat sync display s Extremely low-noise ULN (Ultra Low-Noise) design, like those on professional studio consoles s Gold-plated cinch sockets for excellent audio qual
PRO MIXER VMX100 TABLE OF CONTENTS 1. INTRODUCTION .....................................................................................................................5 1.1 Before you get started ..................................................................................................................... 5 2. FRONT PANEL ........................................................................................................................ 6 2.1 2.2 2.3 2.4 2.5 Input channels 1 and 2 ...........
PRO MIXER VMX100 2. FRONT PANEL Fig. 2.1 Front view of the PRO MIXER VMX100 2.1 Input channels 1 and 2 1 6 The PHONO/LINE switch selects one of the input pairs on the respective channel. The PHONO setting (and inputs) are intended for turntables; for all other signal sources, i.e. a CD or MD player, use the LINE setting and inputs. 2.
PRO MIXER VMX100 + 2 + Never connect line-level equipment to the highly sensitive phono inputs! The output levels of phono cartridge systems are in the millivolt range, whereas CD and MD players, as well as tape decks, provide outputs levels in the volt range. In other words, the level of line signals is up to 100 times higher than phono output levels. The GAIN control is used to adjust the input signal level. The overall level of your signal is also effected by the EQ settings.
PRO MIXER VMX100 DIFFERENCE display. When the center LED is lit, the tracks are in sync with each other. When the display moves to the left or right, the corresponding channel is running out of sync. The TEMPO DIFFERENCE and TIME OFFSET displays are only active when the tempi of both channels have been locked as explained above. To exit the SYNC LOCK or BEAT ASSIST mode, simply press the SYNC LOCK key in both channels again. 2.
PRO MIXER VMX100 + In order to avoid power-up thumps, which can damage your loudspeakers, please power up your amplifier last. There should be no signal present, e.g. no music playing, when you turn on your amp. In addition, we suggest that you set all volume-related controls to zero (down) before powering up your system. Following these precautions will save you from unpleasant and potentially dangerous surprises.
PRO MIXER VMX100 4. SPECIFICATIONS AUDIO INPUTS Mic input Phono inputs 1 and 2 Line inputs 1 and 2 53 dB gain, servo-balanced 40 dB gain @ 1 kHz, unbalanced 0 dB gain, unbalanced AUDIO OUTPUTS Main Out Tape Out Headphones max.
PRO MIXER VMX100 5. WARRANTY § 1 WARRANTY CARD/ONLINE REGISTRATION To be protected by the extended warranty, the buyer must complete and return the enclosed warranty card within 14 days of the date of purchase to BEHRINGER Spezielle Studiotechnik GmbH, in accordance with the conditions stipulated in § 3. Failure to return the card in due time (date as per postmark) will void any extended warranty claims.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION PRO MIXER VMX100 Responsible party name: MUSIC Group Services USA, Inc. Address: 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone/Fax No.: Phone: +1 425 672 0816 Fax: +1 425 673 7647 PRO MIXER VMX100 complies with the FCC rules as mentioned in the following paragraph: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.