Instruction Manual

Hardware Replacement
5.
Remove the mounting plate (9 torx screws). Gently lift the mounting plate
with the display and power card.
9 x torx screws
6.
Flip the mounting plate and unscrew the 4 torx screws.
4 x torx screws
7.
Re-assemble the panel in reverse order.
6.3.1 CalibratingtheTouchScreen
Follow the steps below to calibrate the touch screen:
A touch calibration tool is pre-installed in the EPC TA100 AM. It can be started
from the desktop icon or from the Start menu.
Note:
Touchcalibrationhastobecommencedwithin10secondsfromwhenthetouchscreen
toolwasstarted.
BeijerElectronics, MAEN043
20