Instruction Manual
Introduction
2.2 Maintenance
Carefully read the instructions before beginning maintenance on the Panel PC.
• Only qualified personnel should carry out maintenance.
• The agreed warranty and license agreements apply.
• Any damage to the Panel PC caused by personnel invalidates the warranty.
• Before carrying out any cleaning or maintenance operations, disconnect the
Panel PC from the power supply.
• Clean the display and surrounding front cover with a soft cloth and mild
detergent. Recommended cleaning fluids for the display are water and IPA
(Isopropyl Alcohol or Hexane).
• Replacing the battery i ncorrectly may result in explosion. Only use batteries
recommended by the supplier.
• A 6-month warranty on all service parts is provided.
Maintenance personnel are permitted to carry out the following actions:
• Replacing the Rear Cover
• Replacing the Display/Display Cable
• Replacing the Complete Front
• Replacing the Backlight
2.3 ServiceandRepairs
• Only accredited companies are permitted to perform service and repairs.
• Ifanon-accreditedcompanyconductsanykindofserviceorrepair,theagreed
warranty will be invalidated.
• If training is required, contact the supplier.
• All maintenance should be performed in a 15-30 °C temperature range.
• Any damage to the Panel PC caused by personnel invalidates the warranty.
• Contracts with customers supersede the information in this document.
2.4 DismantlingandScrapping
• The Panel PC, or parts thereof, shall be recycled according to local
regulations.
• The following components contain substances that might be hazardous to
health and the environment: lithium battery, electrolytic capacitor, display.
BeijerElectronics, MAEN043
8