User guide

Foreword

InstallationmanualforiXPanelTA150

Foreword

All iX Panels are developed to satisfy the demands of human-machine

communication. Built-in functions such as displaying and controlling text,

dynamic indication, time channels, alarm and recipe handling are included.

The operator panel works primarily in an object-oriented way, making it easy to

understand and use. Conﬁguration is carried out on a PC using the iX Developer

conﬁguration tool. The project can then be transferred and stored in the operator

panel itself.

Various types of a utomation equipment such PLCs, servos or drives can be

connected to the iX Panels. In this manual, the term “the controller” refers to the

connected equipment.

This manual explains how to install the operator panel. Please refer to the iX

Developer reference manual for further information.

Order no: MAEN011A

The information in thisdocument is subject to c hangewithoutnoticeandisprovidedasavailableatthe

time of printing. BeijerElectronics AB reserves the right to change any information without updating t his

publication. Beijer Electronics AB assumes no responsibility for any errors that m ay ap pear in t his document.

Read the entire installation manual prior to installing and using this equipment. Only qualiﬁed personnel

may install, operate or repair this equipment. Beijer Electronics AB is not responsible for modiﬁed, altered

or renovated equipment. Because the equipment has a widerangeofapplications,usersmustacquirethe

appropriate knowledg e touse the equipment properly in their speciﬁc applications. Persons responsible

for the application and the equipm e nt must them selves ensure that each application is in compliance with

all relevant requirements, standards and legislationinrespecttoconﬁgurationandsafety. Onlypartsand

accessories manufactured according to speciﬁcations set by Beijer Electronics AB may be used.

BEIJER ELECTRONICS AB SHALL NOT BE LIABLE TO ANYONE

FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR

CONSEQUENTIAL DAMAGES RESULTING FROM THE

INSTALLATION, USE OR REPAIR OF THIS EQUIPMENT, WHETHER

ARISING IN TORT, CONTRACT, OR OTHERWISE. BUYER'S SOLE

REMEDY SHALL BE THE REPAIR, REPLACEMENT, OR REFUND

OF PURCHASE PRICE, AND THE CHOICE OF THE APPLICABLE

REMEDYSHALLBEATTHESOLEDISCRETIONOFBEIJER

ELECTRONICS AB .

BeijerElectronics, MAEN011A