Owner's manual

Safety Precautions
• Separate the high voltage, signal and supply cables.
• Make sure that the voltage and polarity of the power source i s correct before
connecting the product to the power outlet.
• Peripheral equipment must be appropriate for the application and location.
1.4 DuringUse
• Keep the operator panel clean.
• Emergency stop and other safety functions may not be controlled from the
operator panel.
• Do not use too much force or sharp objects when touching the keys,
touchscreen etc.
1.5 ServiceandMaintenance
• Only qualified personne l should carry out repairs.
• The agreed warranty applies.
• Before carrying out any cleaning or maintenance operations, disconnect the
equipment from the electrical supply.
• Clean the display and surrounding front cover with a soft cloth and mild
detergent.
• Replacing the battery incorrectly may result in explosion. Only use batteries
recommended by the supplier. During the warranty period, the battery needs
to be replaced by an authorized Beijer Electronics service center.
1.6 DismantlingandScrapping
• The operator panel or parts thereof shall b
e recycled according to local
regulations.
• The following components contain s
ubstances that might be hazardous
to health and the environment: lit
hium battery, electrolytic capacitor and
display.
1.7 AppearanceofAirinTouchScreen
• Thelayerstructureofthetouchscreencontainsairandinrarecases
appearance of bubbles can arise. This is purely cosmetic and does no t affect
any functionality of the panel. The appearance can occur under certain
environmental conditions such as temperature, humidity, and atmospheric
pressure.
BeijerElectronics, MAEN096C
6