Mi Air Purifier 3H User Manual
READ AND SAVE THESE INSTRUCTIONS Warning · Turn off and unplug the purifier before moving it. · The purifier cannot turn on when the fan grille and the filter compartment cover are not installed properly. · Maintain a distance of at least 20 cm between the air inlets and walls or other objects. · Frequently remove dust, hair, and other particles from the outer mesh screen of the filter, so as to reduce the chance of bacteria growth.
Product Overview Note: Illustrations of the product, accessories, and user interface in this user manual are for reference purposes only. The actual product and functions may vary due to product enhancements.
Product Overview Display Temperature 025 25℃ 60% Humidity PM2.5 Mode Auto: Automatically switches modes according to air quality condition Sleep: Ultra-low noise for a comfortable sleeping environment. On/Off & Mode Button 1: Low speed 2: Medium speed Air Quality Indicator 3: High speed One of the colors below will display according to the PM2.5 value Green Orange Red Favorite: Set and save the surface area and the purifying efficiency in the app.
Installation 1 Opening the filter compartment Press the buckle to open the filter compartment, and make sure the filter is installed correctly. 2 Removing the power cord Remove the power cord package, and close the filter compartment.
Usage On/Off & Mode Button Tap to turn on the purifier, then tap to switch modes. Press and hold for two seconds to turn off the purifier. 20cm 10cm 20cm Placing the purifier in a suitable location Display On/Off Button For optimal performance, maintain the recommended distances between the purifier, and walls and other objects (refer to the illustration above). Press the button on the back of the purifier to adjust the display's brightness, or to turn the display on/off.
Usage Filter Status Notifications Resetting Wi-Fi When the phone cannot connect to the purifier, simultaneously press and hold the On/Off & Mode button and the Display On/Off button for five seconds. Once you hear a beep, the purifier's Wi-Fi has been reset successfully. 1 Please install a genuine filter Install an official filter No filter detected, or the installed filter is not genuine.
Care & Maintenance Make sure the purifier is turned off and unplugged. Cleaning the filter compartment Use a vacuum cleaner or a soft cloth to remove any dust from the air inlets or the filter compartment, so as to ensure optimal ventilation and purification. Cleaning the laser particle sensor The latch of the particle sensor's cover is located just above the inside of the filter compartment. Remove the cover, by push a finger up against the latch (as shown in Illustration A).
Specifications Name Mi Air Purifier 3H Rated Voltage 100–240 V~ Clean Air Delivery Rate (CADR Particles) 380 m3/h Model AC-M6-SC Rated Frequency 50/60 Hz Formaldehyde Clean Air Delivery Rate (CADR Formaldehyde) 60 m3/h Item Dimensions 240 × 240 × 520 mm Rated Power 38 W Network Standby Power Consumption < 2.0 W Net Weight Approx. 4.8 kg Noise Level 64 dB(A) Wireless Connectivity Wi-Fi IEEE 802.11 b/g/n 2.
Manufactured by: Beijing Smartmi Electronic Technology Co., Ltd. (a Mi Ecosystem company) Address:Room 201-203, Unit 6, Building A, No. 66,Zhufang Road, Qinghe, Haidian District, Beijing For further information, please go to www.mi.