Operation Manual

- B 25 -

Short Seam Automat 2211-5 Working Instructions

Beisler Automated Sewing Equipment

B.2

Functions of the machine

Fig. 19

Supply switches:

Main switch

The main switch

is used to turn the power supply

of the machine on or off. For safety reasons, the ma-

chine must be turned off using the main switch when

it is standing still for an extended period; in this case,

all functional units are deactivated. The main switch

also serves as an additional emergency off switch.

Vacuum switch

The vacuum switch

is used to turn the optional va-

cuum pump on and off.

Control switches:

Footswitch for machine operation

This footswitch

is used to control the individual ope-

rating steps of the machine or for starting the fully au-

tomatic machine operation.

Footswitch for slash selvage clamp

Depressing the footswitch for the slash selvage clamp

will open or close the slash selvage clamp indepen-

dently of the switching state.

B.2.16 Switches

The short seam automat is equipped with three different

types of switches:

• Emergency switch for stopping a sewing program,

• supply switch for voltage and vacuum pump,

• control switches for controlling the machine operation.

Emergency switch:

Program stop key

When the program stop key

is pressed, all machine

movements and the sewing process are stopped im-

mediately.

The switch engages when pressed. Rotating the switch

in the clockwise direction will release the switch, and

it moves back into its original position.

The control program performs a reset.

Fig. 19