Operation Manual

- C 46 -

Short Seam Automat 2211-5 Working InstructionsBeisler Automated Sewing Equipment

C.5

Maintenance

C.5.3 Service

The following service works must be carried out in weekly

intervals.

Oiling the clamp rail:

1. Disconnect machine from power supply.

2. Wipe clamp rails clean using a soft, oil-saturated cloth.

The scope of delivery comprises 0.25 l of oil. When this

oil is used up, you can order the special machine oil

for service from the manufacturer or supplier of the ma-

chine.

Emptying the water separator:

1. Disconnect machine from power supply.

2. Fig. 5: Drain water at pressure reducer water separator

into suited container. Press button

at pressure re-

ducer collector and keep de pressed until water has

been drained completely.

NOTE - Sewing head!

For information about service of the sewing head,

please refer to the working instructions of the sewing

head.

Fig. 5