Operation Manual

- C 50 -
Short Seam Automat 2211-5 Working InstructionsBeisler Automated Sewing Equipment
C.5
Maintenance
C.5.4 Instandsetzung
Assistance transport belt replacement:
1. Disconnect machine from power supply system.
2. Slide assistance transport to stop position.
3. Fig. 11: Remove retaining screws
1
of the cover
2
and remove cover.
4. Release belt tension, loosen the two belt lock screws
3
as well as set screw
4
.
5. Remove the retaining screws
8
of the belt clamp
9
.
Remove belt.
6. Install new belt to drive roller
7
and to guide roller
5
.
7. The ends of the belt are fitted with holes. Position the
two ends of the belt with the belt clamp
9
exactly over
the holes on the holder and secure them using the
screws.
8. Tension belt by tightening the set screws
4
until the
belt can be depressed approx 10 mm with distinct
counterpressure at the middle of the transport rail.
Thighten the lock screws
3
.
9. Install cover.
Fig. 12: Pin assignment step motor:
1
Plug connections
2
Step motor assistance transport
Fig. 12
Fig. 11/12
Fig. 11