Operation Manual

- C 60 -

Short Seam Automat 2211-5 Working InstructionsBeisler Automated Sewing Equipment

C.5

Maintenance

C.5.5 Machine set-up

Cutter adjustment:

The depth of cut of the gusset is adjusted for all four cutters

using different settings.

• Fig 23: The depth of cut of the two cutters of the wor-

king plate for the gusset of the left and right trousers

components is changed by rotating the adjusting

wheel

• The depth of cut of the gusset in the left slash selva-

ge depends on the cutter block's mounting position. The

mounting angles

have slots. By repositioning the

cutter block in the slots, the cutter can be positioned

at an exact distance to the stop rail

of the pick-up

plate.

• The vertical position of the cutters is set by repositioning

the cutter block in the slots of the vertical angle arm

. Note that the lowered cutters must be positioned

flush with the upper edge of the working plate or of the

pick-up plate.

Fig. 23

NOTE - Cutting position alignment!

The two cutters for the gusset in the left slash selvage

and in the left trousers component must be aligned

to each other in a way that ensures that both cutting

positions are exactly flush.