Operation Manual

- D 83 -
Short Seam Automat 2211-5 Working Instructions Beisler Automated Sewing Equipment
D.3
Programming
D.3.3 Service menu level 1
Functions on level 1
The function keys on the start level are assigned to the
symbols above them as shown on the display.
The settings of the global parameter menu (GP) and of
the special parameter menu (SP) which can also be re-
quested from this level are described in separate sections.
%&'4(>5

F1 Back to start level
F2 Request global parameter menu
F3 Request special parameter menu
F4 Set seam sequence
F6 Reset day counter to zero
F7 Manual winding
F8 Select machine control inputs / outputs


 Setting the seam sequence:
The settings refer to the selected sewing program. The
sequence for sewing the seams can be set at will. When
the sequence is set, existing seam numbers are overwrit-
ten or new seam numbers are written.

• Press  key.
4
• Press  key.
The display shows the marking of the sewing program and
the seam numbers.
01 01 02 03 04
Mark seam number to be changed using cursor:
01 01 02 03 04
Open overwrite function:
• Press  key, seam number will be deleted.
• Press $ key.
Enter new seam number using numeric keypad:
01 01 04 03 04
Confirm input and exit menu:
• Press W key.
The display shows the new seam sequence.
01 01 04 03 04
Erase seam number:
• Mark seam number using cursor, then delete:
• Press  key.
• Press W key.
NOTE - Seam sequences!
Just as the seam sequence can be selected at will, a
seam can be written into a sewing program once or
several times. A sewing program may consist of up
to six seams.


 Resetting the day counter to zero:
This function is used to reset the day counter for a pro-
duction cycle to zero.

• Press  key.
(
• Press  key.
The display counter is now reset to zero.
Display: PART: 0000