Operation Manual

- D 85 -
Short Seam Automat 2211-5 Working Instructions Beisler Automated Sewing Equipment
D.3
Programming
D.3.4 List of inputs and outputs
Valve Output
number
Cylinder
number
Signal
output
Valve
type
Y01 01 Open / close clamp 01 X07 Pin02 5/2 way
Y02 02 Move clamp in / out sideways 02 X07 Pin03 5/2 way
Y03 03 Swing folder left / right 03 X11 Pin20 5/2 way
Y04 04 Rotate folder 04 X11 Pin21 5/2 way
Y05 05 Open / close folder clamp 05 X11 Pin22 5/2 way
Y10 10 Thread clamp forward / rearward 10 X07 Pin06 5/2 way
Y11 10 Blow thread in, synchronous with Y10 X07 Pin06 3/2 way
Y12 12 Right front trousers component cutter 12 X07 Pin11 5/2 way
Y13 13 Slash selvage cutter 13 X07 Pin16 5/2 way
Y14 14 Left front trousers component cutter 14 X07 Pin12 5/2 way
Y15 15 Vacuum on/off 15 X07 Pin01 5/2 way
Y16 16 Slash selvage clamp open / close 16 X07 Pin14 5/2 way
Y22
22 Stamp assistance transport 22 X11 Pin31 5/2 way
Y25 25 Swivel right slash selvage clamp in/out 25
X07 Pin15 5/2 way
Y27 27
Scissors side pocket
27
X11 Pin17 5/2 way
Y31 31 Thread cutter 31 X07 Pin05 3/2 way
Y34 34 Folder up 34 X11 Pin18 3/2 way
Y35 35 Folder down 34 X11 Pin19 3/2 way
Y36 36 Thread tension blower 36 X07 Pin04 3/2 way
Y46 46 Slash selvage trousers 46 X07 Pin13 3/2 way
Y47 47 Parts from trousers 47 X07 Pin07 3/2 way
Switch
Input
number
Switch type
Signal
input
S01 01 Start switch Footswitch Make X09 Pin01
S02 02 Footswitch slash selvage clamp Footswitch Make X09 Pin02
S04 04 Clamp reference point Initiator NPN Break X09 Pin04
S07 07 Folder at right stop Initiator NPN Make X09 Pin07
S08 08 Folder at left stop Initiator NPN Make X09 Pin08
S09 09 Assistance transport basing point Initiator NPN Make X09 Pin09
S21 21 Photocell beginning / end of seam Photocell NPN X13 Pin21
S23 23 Top thread monitor Touch probe
assignment
plug X2
S24 24 Bottom thread monitor (chain stitch) Touch probe
assignment
plug X2
S25 25 Spool rest thread monitor (lock stitch) Photocell NPN X13 Pin25
Inputs
Outputs