Operation Manual

The channels will automatically be scanned and
the channels that have broadcast shall started
to be entered into memory as of the program
that is selected on the channel settings menu.
At the same moment, the Auto-program prompt
menu will be displayed and the mark indicating
the position in which the Automatic Setting
function is found will appear. To stop the process
at any given time, please press the (
) button.
The Program table will appear on the screen
after the automatic search is over.
You can assign any channel to any program
number you would like from among program
numbers that have been stored in the memory
as described in the part Program Table.
If the broadcast viewed on the screen is of your
desired quality, firstly come onto the storing tab
via the downward movement (
) button to store
in the memory the process you have made and
select it with the (
) button. The prompt ‘stored’
shall be briefly displayed.
The channel will be stored according to the
program number of your choice. You can tune
and store in the memory the other channels in
the same way. In the event that you wish to exit
the channel settings menu for any reason, simply
press the (
) button.
COUNTRY SELECTION
BELGIUM
CZECH REP.
DANMARK
DEUTSCHLAND
ELLADA
ESPA
Ñ A
FRANCE
BACK
MENU
START AUTOPROGRAMMING
OK
HUNGARY
IRELAND
ITALIA
NETHERLANDS
NORGE
ÖSTERREICH
POLSKA
PORTUGAL
SCHWEIZ
SUOMI
SVERIGE
TÜRKİYE
U. K.
. . . . .
AUTOPROGRAM
SEARCHING
STOP
MENU
2%
SETUP
EXIT
MENU
SYSTEM
CHANNEL
FINE TUNE
SEARCH
PROGRAM NO
STORE
AUTOPROGRAM
BG
C - -
0
P 01
SELECT
Automatic tuning and storing in the
memory the TV channels via Autoprogram
Manual tuning and storing of the
television channels:
If you already know the Channel
number:
Press the ( ) button. Move onto the
channel settings menu by pressing
the down movement button. Go onto the
menu with the (
) button. Select the
system in which you would like to make
the search from among the system tabs.
Enter the Channel tab by pressing the
movement button (
) below. Pressing
the right-left movement buttons (
)/( )
or (
) on your remote control, select
the “S” for cable channels and “C” for
broadcasts received via the antenna.
Move onto the program no. tab and
select the program in which you would
like to have the Setup made via the
numerical buttons.
-10-
Press the ( ) button. Move onto the
channel settings menu by pressing the
down movement button (
). When
you select the autoprogram tab by
pressing the Up/down direction
(
)/( ) buttons and pres the button
(
), the autoprogram menu will be
visualized on the screen. In the country
tab, select the country of which you
would like to watch the broadcast in
priority by pressing the right/left direction
buttons (
)/( ). Then, start the
autoprogram operation by pressing the
(
) or ( ) button.