Operation Manual

PC Accession Setting
In the PC mode, enter the picture setting menu
by pressing either the (
) or Green ( ) button.
In order to make the necessary adjustments in
this menu, you can use the Right-left, Up-down
direction (
)/( ) ( )/( ) buttons on your remote
control.
Here, you can not only make the brightness and
contrast settings, you can also make the following
settings related to the monitor.
X. Position: Horizontal position setting
Y. Position: Vertical position setting
Phase: Using the right/left direction ( )/( )
keys, you can ensure that the colors and shapes
are exactly consolidated on the PC image.
Automatic configuration: The most
suitable geometric settings in accordance with
the entry mode are configured by this function.
For this application, simply select the Automatic
Position tab and press the (
) button.
You can make the ZOOM and PIP processes in
the PC mode as described in the above parts.You
can adjust the sound of the source you have
connected to the Audio-In input behind yout TV
using the buttons (
)/( ), you can make it ( ).
Note2: To connect a RGB-supported external
device to your television, it is necessary that you
use a RGB supported Scart cable. If your external
device is supported in that case, you can set the
output as RGB.
Note3: It is necessary that the decoder device
be equipped with a tuner so that you can connect
a decoder through a RCA connection.
Connecting a Video recorder device and a digital satellite receiver
Switching to the HDMI mode
Connect it to the HDMI input behind your TV
using connector located on your PC or your
digital video-transmission device and a suitable
cable (not supplied with the TV).
Note1: To be able to watch an image in the
HDMI mode, it is necessary that your computer
be equipped with a HDMI supported screen card.
You may see on the screen the resolution
information by pressing the “
” button.
If a DVD source is connected to the HDMI input
via an appropriate cable connector, the sound
in the PC AUDIO IN is emitted out of the
loudspeaker.
Clock Frequency: This is the pixel clock
frequency. User can norrow down or enlarge the
display by selecting a desired value.
HDCP support: Your set supports HDCP feature.
To use this feature, you must set up a connection
to your TV set’s HDMI video port and select
HDMI by pressing the AV key on your remote.
ANT IN
ANT OUT
Scart 2 AUXIN
Scart 1 TV IN/OUT
DIGITAL SATALLITE RECEIVER VIDEO RECORDER BEHIND THE TELEVISION
Scart Socket
Antenna
socket
Scart
-19-