Operation Manual

Technical specifications chart
General technical specifications
Power supply
AC: ............................................................................
230V 50 Hz
Program memory: ..................................................100
RF Antenna input: ..................................................75 Ohm (Co-axial)
Loudspeaker impedance: .....................................8 Ohm
Sound systems: ......................................................Mono/Stereo/Nicam
Batteries ...................................................................2xUM - 4, IEC R03 or AAA 1.5V
Received channels: ................................................VHF (Band I channel 2-4)
..................................................................................VHF (Band III channel 5-12)
..................................................................................UHF (Channel 21-69)
..................................................................................Cable TV (S1-S20/S21-S41)
Received broadcasting systems................................PAL BG
PAL SECAM BG
PAL SECAM BG DK/DK’
PAL SECAM BG LL’
PAL I
Note: Your television has been manufactured in accordance with your country by selecting from among the
above mentioned broadcasting systems and this system cannot be changed by the user except the case described
below: In countries where BG/DK and BG/LL’ broadcasts are done (BG or DK / BG and LL’). For further information,
see the settings part about your television.
-21-
26” 32” 37”
2x7 W
120 W
OPT.
145 W
OPT.
2x7 W
120 W
OPT.
27”
1,5 W 1,5 W1,5 W
12 1212
2x10 W
175 W
OPT.
1 W
12
26”, 16:9 Active
matrix TFT
32”, 16:9 Active
matrix TFT
27”, 16:9 Active
matrix TFT
37”, 16:9 Active
matrix TFT
40”
40”, 16:9 Active
matrix TFT
2x10 W
240 W
OPT.
1 W
12
2x10 W
42”
42”, 16:9 Active
matrix TFT
2x10 W
240 W
OPT.
1 W
12
SCREEN SIZE
Panel type
Sound output
Power
consumption
Stand-by power
consumption
Virtual dolby
surround
Teletext page