English (United States)

13 / 29 EN
Refrigerator / User Manual
Installation
3.3 Inset installations

cabinetry or in an alcove, be sure there is
adequate airflow around the product for proper
functionality. This refrigerator requires at least
2” from the top of the unit to the ceiling or
enclosure, 5/8” on each side and 1 3/8” in the
back.

or alcove, be sure the parts shown below are
installed on the unit.
3.4 Electrical connection

Circuit.

but any failure of the GFCI could cause
food spoilage, which is not covered by the
manufacturer’s warranty.

regulations.

after installation.

or multi-plugs.
B
WARNING: Damaged power cable must


B
WARNING: If the product has a failure, it
should not be operated unless it is repaired

the risk of electric shock!
3.5 Adjusting the feet

recommend lowering the feet to secure the

if the product is not balanced. Twist the feet in
the desired direction according to the illustration

the doors.
B
WARNING: First unplug the product.
Product must not be plugged in when

electric shock!
The longer screw must
be used on the top.
circulation part
unscrew before the installation
Install the vertical
metal bracket and screw.