Installation Manual

14
USA
7.2 READJUSTING FOOT
LEVELS
Now that the dshwasher s n the
cabnet you must readjust the feet to
brng the dshwasher up to the requred
heght and attach t underneath the
countertop.
1. Readjust the front foot levels wth
adjustng wrench to balance the
dshwasher and rase t up under the
countertop, make sure the unt s level.
2. Readjust the rear foot levels wth a
screwdrver to balance the dshwasher
and rase t to the requred heght usng
the brackets suppled.
3. Attach the dshwasher underneath
the countertop wth the four screws
suppled (Ø 1/8” x 1/8” - Ø 3.5mm x
14mm). Make sure you do not go through
the top of the countertop or damage
grante.



7.3 ADJUSTING THE MOVABLE TOE KICK
Now that you have successfully nstalled the dshwasher, you need to attach
the toe kck to the dshwasher. The two pece toe kck can be adjusted to the
heght and depth needed for your ktchen. Be sure to use the slotted toe kck
n the front and the other behnd t. They slde nto each other.
1. Insert the movable toe kck brackets nto the channel ( A ).
2. Make sure that the plastc tab to the left of the “L” openng on the
dshwasher has not closed the channel you wll push the bracket through.
NOTİCE :
Be sure to notce there s a left and a rght bracket.
Adjust the toe kck brackets forward or backwards so that they wll algn wth
the ktchen toe kck ( B ).