Installation Manual

15
USA




















Lock the toe kck brackets as shown wth the plastc tab n the
fgure C by pushng the plastc tab on the dshwasher nto the
teeth of the bracket ( C ).
3. Now attach the toe kck to the bracket wth the two (Ø
3
/
16
” x
1
/
4
” - Ø 4mm x 6mm) screws and the caps provded as follows.
If the enclosure heght s below 33
1
/
16
” (840mm) use only “o”
labelled toe kck (toe kck wthout slots). Installaton should be
done followng the steps llustrated n the Fgures A, B and C
respectvely.
1. Bend tabs on toe kck (o) nwards ( A ).
2. Secure toe kck to brackets wth screws (t) as shown n the
supply bags ( B ).
3. Attach caps (s) as shown n the supply bags ( C ).
If the enclosure heght s above 33
1
/
16
” (840mm) use “o” and “p”
labelled toe kcks together. Make sure the slotted toe kck “p” s on
the outsde so you can adjust heght of the toe kck. Installaton
should be done followng the steps llustrated n the fgures A, B
and C respectvely.
1. Algn the toe kck (o) and (p) ( A ).
2. Secure toe kcks to brackets wth screws (t) after adjustng the
heght of the slotted toe kck (p) ( B ).
3. Attach caps (s) as shown n the supply bags ( C ).
If the enclosure heght s above 34
1
/
4
” (870mm) use “o” and “r”
labelled toe kcks together. Make sure the slotted toe kck “r” s on
the outsde so you can adjust heght of the toe kck. Installaton
should be done followng the steps llustrated n the fgures A, B
and C respectvely.
1. Algn the toe kck (o) and (r) ( A ).
2. Secure toe kcks to brackets wth screws (r) after adjustng the
heght of the slotted toe kck (t) ( B ).
3. Attach caps (s) as shown n the supply bags ( C ).