Installation Manual

23
USA
8. INSTALLER CHECKLIST
Your nstaller must have completed and checked
the followng:
• The dishwasher is square and level.
• The dishwasher is fastened securely to the
cabinetry.
• The dishwasher door opens and closes
freely. The dishwasher door must close
without hitting any cabinetry or counter
top.
• The inlet water supply is turned on and
checked for leaks.
• The drain hose has been connected and
checked for leaks. There must be no kinks
or obstructions in the drain hose.
• The drain hose must be installed with a 28"
(710mm) high drain loop for drain hook-ups
without any air removed.
• If the dishwasher drain is hooked up to a
garbage disposal, the drain hopper plug
must be removed.
• The spray arms are free and rotate freely.
• The rinse cycle has been run.
• The water level will be below the filter
screen after the end of the wash program.
It is normal to find some water in the drain
filter area.
9. SELF HELP HINTS:
The screen does not come on:
• Check to make sure the breaker to the
dishwasher is in the on position.
• Check to make sure that the Supply cord is
plugged.
No Water is coming into the dishwasher:
• Check to make sure the hot water shut-off
is in the ON position.
Water does not drain:
• Make sure drain hose is not kinked or
comes out of air gap next to the sink.
• Remove drain hose from disposal making
sure plug is removed.
NOTICE :
• If your dishwasher is not operating
properly after following these steps:
Contact your dealer to schedule an
authorized service agent to inspect your
new dishwasher for any function related
failure.
• The manufacturer warranty does not
cover installation, conversion or customer
education service visits.
You wll fnd the model and seral number
nformaton on the label located on the rght-
hand sde of the nner door of your dshwasher,
as shown above.
NOTICE :
Please make a copy of your nvoce and keep t
wth ths manual and regster your dshwasher
on-lne.