User Manual

26
USA
C
You can check the indicator on
the product to see if wireless
connection is enabled or not.
If the wireless connection is off,
you can see that the Wi-Fi icon
is off.
If the Wi-Fi icon is on, this
means that the wireless
connection of the product is on
and the product is connected to
the wireless network. If the Wi-
Fi icon is continuously flashing
at regular intervals, this means
that it is enabled but could not
connect or is trying to connect
the network.
Wireless connection is on / off When the
machine is on, press the “Menu” key for
1 second to enter the settings menu.
Follow the screen and press <- and +>
keys on the panel, then wait until the Wi-Fi
connection indicator comes on. Press the
selection key and if the Wi-Fi connection
is on, turn it off; if it is off, turn it on. In the
wireless connection on/off settings menu,
if the wireless connection is on, the Wi-Fi
connection indicator will light permanently;
if it is off, the Wi-Fi connection indicator
will flash at short intervals.
Once the wireless connection has been
turned “On”, your machine will connect
to the home network by using the setup
settings you made before.
Deleting the HomeWhiz settings
While the dishwasher is on, press the
“Menu” key for 1 second to enter the
settings menu. Follow the screen and
press <- and +> keys on the panel, then
proceed until the Wi-Fi setting indicator
comes on. Press and hold the selection
key for 5 seconds. After the 5 - 4 - 3 - 2 - 1
countdown on the display, your settings
will be deleted.
HomeWhiz troubleshooting
Follow these instructions if you encounter
a control or connection problem. If it
persists, take the next step.
1. Check if your smart device is connected
to the internet.
2. Close the HomeWhiz application on
your smart device and start it again.
3. Restart your smart device.
4. Check the wireless connection status
of your dishwasher. If you see "WLAN:
Off", switch it to "WLAN: On" and wait
for the machine to connect. Then close
the HomeWhiz application on your
smart device and start it again.
5. If the connection cannot be
established following the instructions
above, repeat the initial setup settings
on the appliance.
6. If the problem persists, contact the
authorised service.