Dishwasher User’s Manual EN Document Number : 15 0193 0100_AC_BEKO_E5_EN/ 18-10-16.
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use. If you handover the product to someone else, give the user manual as well. Follow all warnings and information in the user manual.
Dishwasher User’s Manual EN Document Number : 15 0193 0100_AC_BEKO_E5_EN/ 18-10-16.
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use. If you handover the product to someone else, give the user manual as well. Follow all warnings and information in the user manual.
CONTENTS 1 INSTRUCTIONS FOR SAFETY AND ENVIRONMENT 4 General safety............................................... 4 Intended use.................................................. 4 Children’s safety............................................ 5 Disposing of packaging material................ 5 Transportation of the product.................... 5 Compliance with WEEE Directive and Disposing of the Waste Product................. 6 Compliance with RoHS Directive................ 6 Package information..........
1 instructions for safety and environment This section contains safety instructions that will help to get protected from risk of personal injury or property damage. Failure to follow these instructions shall void all warranties. General safety •• •• •• •• •• •• Never place the product on a carpet-covered floor; otherwise, lack of airflow beneath the product will cause electrical parts to overheat. This will cause problems with your product.
instructions for safety and environment •• This appliance is intended to be used in household and similar applications such as: - Staff kitchen areas in shops, offices and other working environments; - Farm houses; - By clients in hotels, motels and other residential type environments; - Bed and breakfast type environments •• Only dishwasher safe detergents, rinse aids and additives must be used. •• The manufacturer waives any responsibility arisen from incorrect usage or transportation.
instructions for safety and environment Compliance with WEEE Directive and Disposing of the Waste Product domestic or other wastes. Take them to the packaging material collection points designated by the local authorities. This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling.
Dishwasher 2 Overview 16 Dishwasher / User’s Manual 1. Upper basket 2. Upper impeller 3. Lower impeller 4. Filters 5. Lower basket 6. Rating Label 7. Control panel 8. Door 9. Detergent dispenser 10. Cutlery basket 11. Salt reservoir lid 12. Upper basket rail 13. Upper cutlery basket 14. Top Cover (depends on model) 15. Ceiling impeller 16.
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations.
3 Installation Refer to the nearest Authorised Service Agent for installation of your product. To make the product ready for use, make sure that the electricity, tap water supply and water drainage systems are appropriate before calling the Authorised Service Agent. If they are not, call a qualified technician and plumber to have any necessary arrangements carried out.
Installation Permitted water temperature: up to 25°C The dishwasher may not be connected to open warm water devices or flow-through water heaters. •• Do not use old or used water inlet hose on the new product. Use the new water inlet hose supplied with the product. •• Connect the water inlet hose directly to the water tap. Pressure coming from the tap should be minimum 0.3 and maximum 10 bars. If the water pressure exceeds 10 bars, a pressure relief valve should be installed in between.
Installation •• C min 120 min 300 min 500 max 1000 •• Drainpipe must be connected to the sewage system and it should not be connected to any surface water. Adjusting the feet If the door of the product cannot be closed properly or if the product swings when you push it slightly, then you need to adjust the feet of the product. Adjust the feet of the product as illustrated in the installation manual supplied with the product.
4 Preparation Tips for energy saving Following information will help you use the product in an ecological and energyefficient manner. Wipe away any coarse food remnants on the dishes before putting them in the product. Operate the product after filling it completely. When selecting a programme, consider the table of “Programme data and average consumption values”. Do not put more detergent than suggested on the detergent package. determine hardness level of your supply water.
Preparation a b c 1 min. d e f 1 Second 1 Minute Remove the test strip from the packet. Turn on the tap and Hold the test strip in Remove the test let the water run for the water for about strip from the water about a minute. a second. and shake it. Wait for 1 minute. The test strip shows you the hardness level. After determining hardness level of the supply water: 1. Turn on the machine, press Time Delay and P+/P keys simultaneously.
Preparation If the hardness level of the supply water is above 90 °dF or if you are using well water, then it is recommended to use water purification devices and special filters. If the hardness level of the supply water is below 13°dF, there is no need to use salt in your dishwasher. If this is the case, “No Salt Warning Indicator” (if any) illuminates continuously on the panel of your machine.
Preparation C Before initial use, fill the water softening system with 1 litre of water (C). 3. Fill the salt reservoir with salt by using salt funnel (D). To speed up dissolution rate of salt in water, stir it with a spoon. C Since different salt brands in the market have different particle sizes and since the water hardness may vary, dissolution of the salt in water may take a couple of hours. Therefore, Salt Indicator remains on for a while after adding salt into the machine.
Preparation A Do not put solvents into the detergent dispenser. There is risk of explosion! Put the detergent into the detergent dispenser just before operating the machine as illustrated below. 1. Push the latch to right to open the detergent dispenser lid (A). C If dishes have been waiting for a long time and have dried residues, fill the 5 cm³ compartment too (2). 3. Close the detergent dispenser lid by pressing on it lightly. A “click” will be heard when the lid is closed.
Preparation as 3in1, 5in1, Allin1 etc. They function only up to a specific degree of water hardness. Above this limit regeneration salt and rinse aid must be added. Refer to the instructions on the packaging of the combined detergent whether it is suitable for the hardness level of the water supply. While using combined tablet detergents contact with the detergent producers if the dishes are wet and/or if you notice limescale spots particularly on glasses after the washing programme is over.
Preparation decreased. This is set to position 4 as factory default. 4. Close the lid of the reservoir by pressing on it lightly. C Wipe clean any spilled rinse aid outside the reservoir. Rinse aid that spilled accidentally will cause foaming and it will eventually decrease washing performance. Items not suitable for washing in the dishwasher •• Never wash dishes soiled by cigarette ash, candle remnants, polish, dyestuff, chemicals, etc. in your dishwasher.
Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Improper Loading Of Dishware Dishwasher / User’s Manual 19/51 EN
Preparation Silverware basket piece (depends on model) You can place your forks, spoons and etc. to upper basket with the additional piece in the figure.. 20 /51 EN Silverware basket (depends on model) Silverware basket is designed to wash your dishes such as fork, spoon and etc. in a cleaner manner.
Preparation Cutlery basket (depends on model) Cutlery basket is designed to wash your dishes such as knife, fork, spoon, etc. in an efficient manner. Since the cutlery basket can be moved (A, B), you can create more space while placing your dishes in the lower basket and free up space for your dishes of different sizes. Cutlery basket (depends on model) Cutlery basket is designed to wash your dishes such as knife, fork, spoon, etc. in an efficient manner.
Preparation Collapsible lower basket wires (6 pieces) (depends on model) The foldable wires (A) located at the lower basket of the machine are designed for an easier placement of large pieces such as pans, bowls, etc. You can create larger spaces by folding each wire individually or all them at once. To bring the collapsible wires into horizontal position, grab the wire from mid position and push them in the directions of arrows (B) To bring the wires back to vertical position, just lift them up.
Preparation Collapsible lower basket wires (4 pieces) (depends on model) The four piece foldable wires located at the lower basket of the machine are designed for an easier placement of large pieces such as pans, bowls, etc. (1, 2, 3, 4). You can create larger spaces by folding each wire individually or all of them at once. Lay the foldable wires down by pressing on the latch (A).
Preparation Collapsible lower basket tines (depends on model) There are foldable tines (A) located at the lower basket of the machine are designed for an easier placement of large pieces such as pans, bowls, etc. You can create larger spaces by folding each tines individually or all of them at once. C To bring the collapsible tines into horizontal position, grab the tines from mid position and push them in the directions of arrows (B). To bring the tines back to vertical position, just lift them up.
Preparation Collapsible lower basket tines (depends on model) There are foldable tines (A) located at the lower basket of the machine are designed for an easier placement of large pieces such as pans, bowls, etc. You can create larger spaces by folding each tines individually or all of them at once. C To bring the collapsible tines into horizontal position, grab the tines from mid position and push them in the directions of arrows (B). To bring the tines back to vertical position, just lift them up.
Preparation SoftTouch Accessory (depends on model) The SoftTouch Accessory found in the lower basket of your machine enables a safe washing for your fragile glasses. Tray Wash Supports (depends on model) Use the supports to wash trays in the bottom basket. See the Auxiliary functions section for appropriate programme and function selection.
Preparation Lower basket multipurpose / height adjustable service rack (depends on model) This accessory located at the lower basket of your machine allows you to easily wash pieces such as extra glasses, long ladles and bread knives. A Make sure that the impeller does not touch the dishes you placed on the racks. To close the racks: 1. Fold the rack (A). 2. Slide the rack up (B). 3. Put the rack in vertical position (C). 4. Slide the rack down and lock it by the tabs (D).
Preparation Upper basket height adjustable rack (depends on model) Use the lower and upper parts of the height adjustable racks in the upper basket of the machine by sliding them down or up according to the heights of the glasses, cups or etc. (A, B, C). Upper basket glass support piece (depends on the model) When placing long stemmed glasses or wine glasses, do not lean them against other pieces but to the edge of the basket or to the rack (1). Do not lean long glasses against each other.
Preparation Upper basket glass support piece (depends on the model) When placing long stemmed glasses or wine glasses, do not lean them against other pieces but to the edge of the basket or to the rack (1). Do not lean long glasses against each other. They can move and get damaged during washing. Collapsable upper basket wires (depends on the model) To bring the collapsable wires on the upper basket of the machine into horizontal position, press on the latch (1).
Preparation Collapsible upper basket tines (depends on model) There are foldable tines on the upper basket of the machine that you can lay down when you need larger space for big dishes. On your upper basket there are two types of laying tines namely, fully laid system (A) and gradually laid system (B). To bring the foldable tines into horizontal position, push the tines in the direction of the arrow by holding from the middle. Place your larger dishes into the area created.
Preparation Adjusting the height of the upper basket (depends on model) Basket adjustment mechanism on the loaded upper basket of the machine is designed to allow you create taller areas in the upper or lower section of the machine based on your requirements by adjusting the height of the loaded basket in up or down directions. To raise the basket: Grab one of the upper basket wires (right or left) and lift it up (A). Repeat the same process to raise the other side of the basket.
Preparation Adjusting the height of loaded upper basket (depends on model) Basket adjustment mechanism on the upper basket of the machine is designed to allow you create wider areas in the upper or lover section of the machine based on your requirements by adjusting the height of the loaded basket in up or down directions without removing it from the machine. To raise the basket: 1. Grab one of the upper basket wires (right or left) and lift it up (A). 2.
Preparation Height setting with empty basket (depends on model) In this model, the height setting of the upper basket may be changed using the wheels which are mounted at two different heights. Release the latches on both the right and left tracks of the upper basket by pushing them outwards Pull out the basket out completely. Place the basket back into the tracks at the desired height Push the latches back into the correct position.
Preparation Upper cutlery basket (depends on model) The upper cutlery basket is designed for small dishes, or long items that cannot fit into the lower cutlery basket. After taking out the basket by lifting it up, remove the carrier part from the rails by pulling it towards yourself (C). Thanks to the easy take-out-from-themachine feature, it allows taking out the dishes from the machine together with the basket after they are washed (A).
5 Operating the product 1 2 3 4 5 6 13 12 7 8 11 3 9 10 1. On/Off key 2. Programme Selection / Programme Cancel (3 seconds) key 3. Function keys F1 Half Load Function F2 Fast+ Function F3 SteamGloss Function F4 TrayWash Function 4. Programme indicator 5. Salt indicator 6. Not in use 7. Start / Cancel indicator 8. Time Delay / Programme Time indicator 9. Time Delay key 10. Time Delay indicator 11. End of Programme indicator 12. Not in use 13.
Operating the product Keys On/Off key When you press On / Off key, indicator lights illuminate on the display for ON position. The lights turn off in OFF position. Programme Selection / Programme Cancel key Press this key until the desired programme appears in the programme indicator. To cancel the running programme open the door of the product. Press and hold the Programme Selection / Programme Cancel keys for 3 seconds.
Dishwasher / User’s Manual 50 ºC - + 202 10 - 75 14,4 Dry Duration (min) Water (I) 0,90-1,45 10,2-14,4 110-200 + + + A Medium to high 70 ºC Intensive 4 70 ºC Quick & Clean 5 40 ºC GlassCare 6 1,36 18,6 189 + + + A+B Medium 1,43 16,2 156 + + + A+B High 1,30 10,2 58 + + - A+B Medium 0,92 13 102 + + + A Low It is the most Suitable for heavily Daily washing Special programme suitable washing soiled dishes, pots programme at for gentle cleaning programme
Operating the product Auxiliary functions Washing programmes of your dishwasher are designed to obtain the best cleaning effect, considering the type of the soiling, soiling degree and properties of the dishes to be washed. Auxiliary functions allow you save from time, water and power. Auxiliary functions may cause changes in the programme duration. C C Auxiliary functions are not suitable for all washing programs.
Operating the product Interior Lighting (Depends on the model) Some models have interior lighting to illuminate the interior when the door is opened. Changing the interior lighting setting 1. After turning on the machine, press Time Delay and P+ keys simultaneously. Continue to press until the countdown 3, 2, 1 is completed on the display. 2. Press P+ key to activate the L: option. The interior lighting is turned off at "L:0" option and turned on at "L:1" option.
Operating the product countdown, 0:01 is displayed, close the door of the product and wait for the draining process complete. Draining is completed in 2 minutes and the machine gives an audible warning when it is completed. You can select and start a new programme following the cancellation of Time Delay function. C C Time Delay function cannot be set after the programme starts. Starting the programme Close the door of your machine to start it after selecting the programme and auxiliary functions.
Operating the product End of programme C When the programme you have selected comes to an end, an audible warning signal will warn you to turn off your machine. This audible signal will warn you with certain intervals before it turns off. End of Programme indicator will light up when the washing programme is over. 1. Open the door of the machine. 2. Press On/Off key to turn off your machine. 3. Close the tap. 4. Unplug the machine from the socket.
6 Maintenance and cleaning Service life of the product extends and frequently faced problems decrease if it is cleaned at regular intervals. Unplug the product and turn off the tap before attempting any cleaning procedures. A C C Do not use abrasive substances for cleaning. Clean the filter and impellers at least once a week to ensure the machine operates efficiently. Cleaning the filters Clean the filters at least once a week in order for the machine operates efficiently.
Maintenance and cleaning Cleaning the hose filter 4. Clean all three filters under tap water by means of a brush. 5. Replace the metal/plastic filter. 6. Place the coarse filter into the microfilter. Make sure that it is properly seated. Turn the coarse filter clockwise until a “click” sound is heard. C C Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.
Maintenance and cleaning Cleaning the impellers Clean the impellers at least once a week in order for the machine operates efficiently. Lower impeller Check if the holes on the lower impeller (1) are clogged. If they are clogged, remove and clean the impeller. Pull the lower impeller up to remove it (A, B). Upper impeller Check if the holes on the upper impeller (1) are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to remove the upper impeller (A, B).
Maintenance and cleaning Ceiling Impeller Check if the holes on the top ceiling impeller (1) of your machine are clogged. If they are clogged, remove and clean. To remove them, slightly ( ) push them upwards and then ( ) turn left (A,B). To install the impeller, seat it into its slot, push slightly upwards and turn it rightwards until it is securely tightened. When the impeller is released, check if it rotates without any obstruction.
7 Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. • Door of the machine is open. >>> Make sure that you have closed the door of the machine. • On / Off button is not pressed. >>> Make sure that you have turned on the machine by pressing the On / Off button.
Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed. Slightly open the door and wait for evacuation of the steam inside for a while. Unload the dishes after the pieces cool down to a touchable level.
Troubleshooting Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme. There is a different odour in the machine • • C A new machine has a peculiar odour. It will fade out after a couple of washes. Filters are clogged. >>> Check if the filter system is clean. Clean the filter system regularly as illustrated in section “Cleaning and Care”. Dirty dishes are kept in dishwasher for 2-3 days.
Troubleshooting Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing. • Opening of the detergent dispenser lid is prevented during washing.
Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid. • Corrosion has occurred on glass due to soft water. >>> Measure the hardness of the supply water appropriately and check the water hardness setting. If your supply water is soft (<5 dH), do not use salt.