GNE 60520 DX Refrigerator
Please read this manual first! Dear Customer, We hope that your product, which has been produced in modern plants and checked under the most meticulous quality control procedures, will provide you an effective service. For this, we recommend you to carefully read the entire manual of your product before using it and keep it at hand for future references. This manual • Will help you use your appliance in a fast and safe way. • Read the manual before installing and operating your product.
CONTENTS 1 The refrigerator 3 2 Important Safety Warnings 4 Intended use...................................... 4 For products with a water dispenser;.. 6 Child safety......................................... 6 HCA Warning..................................... 6 Things to be done for energy saving... 6 3 Installation 7 Points to be considered when retransporting your refrigerator.............. 7 Before operating your refrigerator....... 7 Electric connection.............................
1 The refrigerator A 1 2 3 4 5 6 7 8 9 B A- Fridge compartment B- Freezer compartment 1- Butter & Cheese shelf 2- Fridge compartment door shelves 3- Fridge compartment glass shelves 4- Diffuser cover 5- Illumination lens 6- Movable middle section 7- Fresh Store compartment 8- Bottle shelf 9- Crisper 10- icebox 11- Movable separators 12- Ice maker 10 11 11 12 C Figures that take place in this instruction manual are schematic and may not correspond exactly with your product.
2 Important Safety Warnings Please review the following information. Failure to observe this information may cause injuries or material damage. Otherwise, all warranty and reliability commitments will become invalid. Intended use This product is intended to be used – indoors and in closed areas such as homes; – in closed working environments such as stores and offices; – in closed accommodation areas such as farm houses, hotels,with retirement homes. • This product should not be used outdoors.
• Exposing the product to rain, snow, sun and wind is dangerous with respect to electrical safety. • Contact your authorised service agent in the event of damage caused to your power cable. • Please contact an authorised electrician in the event of power cord damage. • Never plug the refrigerator into the wall outlet during installation. Otherwise, risk of death or serious injury may arise. • This refrigerator is intended for only storing food items. It must not be used for any other purpose.
For products with a water dispenser; Things to be done for energy saving For a mains connected system the minimum pressure should be 100 kpa and the maximum pressure should not exceed 800 kpa. • Use filtered water only. Child safety • If the door has a lock, the key should be kept away from reach of children. • Children must be supervised to prevent them from tampering with the product. HCA Warning If your product's cooling system contains R600a: This gas is flammable.
3 Installation C Please remember that the manufacturer shall not be held liable if the information given in the instruction manual is not observed. Points to be considered when re-transporting your refrigerator 1. Your refrigerator must be emptied and cleaned prior to any transportation. 2. Shelves, accessories, crisper and etc. in your refrigerator must be fastened securely by adhesive tape against any jolt before repackaging. 3.
Electric connection Connect your refrigerator to a grounded socket which is being protected by a fuse with the appropriate capacity. Important: B The connection must be in compliance with national regulations. B The power cable plug must be easily accessible after installation. B The specified voltage must be equal to your mains voltage. B Extension cables and multiway plugs must not be used for connection. B A damaged power cable must be replaced by a qualified electrician.
Placing and Installation Floor balance adjustment A Caution: Never plug the refrigerator into the wall outlet during installation. Otherwise, risk of death or serious injury may arise. A If the entrance door of the room where the refrigerator will be installed is not wide enough for the refrigerator to pass through, than call the authorized service to have them remove the doors of your refrigerator and pass it sideways through the door. 1. Install your refrigerator to a place that allows ease of use. 2.
Adjusting the gap between the upper door C Adjust the door appropriately as you desire by loosing the screws. C Fix the door you have adjusted by tightening the screws without changing the position of the door. C You can adjust the gap between the fridge compartment doors as illustrated in the figures. Door shelves should be empty when adjusting the door height. C Using a screwdriver, remove the screw of upper hinge cover of the door you want to adjust. C Replace the hinge cover and fix with the screw.
Installing Water Filter (in some models) Two different water sources may be connected to the refrigerator for water supply: the mains cold water supply and water in a bottle. Installation Requirements A pump should be used for bottle water usage. Check that the parts stated below are supplied with your appliance. 1. Union for connection of the water pipe to the rear of the appliance. (If it does not fit, provide it from the nearest authorized service.) 2.
Connection of Water Hose to the Bottle (in some models) To connect water to the refrigerator from a bottle, a pump is needed. Follow the instructions below after connecting one end of the water pipe coming out of the pump to the refrigerator as described on the previous page. 1. Finish the connection by pushing the other end of the water pipe into the water pipe inlet of the pump as shown in the figure. 2. Put and fix the pump hose into the bottle as shown in the figure. 3.
Connection of the Water Pipe to the Cold Water Mains Line (in some models) If you want to use your refrigerator by connecting it to the cold water mains line, you will have to connect a standard 1/2" valve connection fitting to the cold water supply in your house. In case this valve is not present or in case you are not sure, consult a qualified plumber. 1. Separate the union from the tap adaptor. (Figure A) 2. Install the tap adaptor to 1/2” valve fitting as shown in the figure. (Figure B) 3.
1. Press ice cancel button on the display. 2. Remove the filter cover in the fridge compartment by pulling it forward. 3. Take out the water filter by-pass cover by rotating it downwards. A Caution: Make sure that the “Ice off” mode is active before taking out the by-pass cover. Note: It is normal that a few drops of water drip after the cover has been taken out. 4. Remove the lid on top of the water filter to place it as shown in the figure and turn upwards to lock it. 5.
The water filter must be removed as shown in the figure when it is going to be replaced or when it will no longer be used and by-pass cover must be attached. It must be made sure that Ice Off mode is active before taking it out. A Caution: Water filter cleans some foreign particles in the water. It does not purify water from microorganisms. A Caution: Ice Off button must always be pressed during replacement of the water filter or installing the by-pass cover.
Using the water spring Spillage Tray Warnings It is normal for the first few glasses of water taken from the dispenser to be warm. In cases where the water dispenser has not been used frequently, sufficient amount of water must be drained from the dispenser to get fresh water. 16 Water drops that drip during use, accumulates in the spillage tray. You can remove spillage tray by pulling it to yourself or pressing on its edge (depending on the model).
4 Preparation C Your refrigerator should be installed at C C C C C least 30 cm away from heat sources such as hobs, ovens, central heater and stoves and at least 5 cm away from electrical ovens and should not be located under direct sunlight. The ambient temperature of the room where you install your refrigerator should at least be 10°C. Operating your refrigerator under cooler conditions than this is not recommended with regard to its efficiency.
5 Using your refrigerator Indicator Panel This touch-control indicator panel allows you to set the temperature without opening the door of your refrigerator. Just touch the relevant button with your finger to set the temperature. 1 8 17 16 7 10 4 21 5 2 19 15 6 3 20 14 9 1. Fridge Compartment Temperature Setting Button 2. Eco-Ekstra Button 3. Freezer Compartment Temperature Setting Button 4. Quick Cool Button 5. Vacation Function Button 6. Fast Freeze Button 7.
1- Fridge Compartment Temperature Setting Button Press this button to set the temperature of the fridge compartment to 8, 6, 4, 2, 8... respectively. Press this button to set the desired temperature for the Fridge Compartment. 2- Eco-Ekstra Button Press this button briefly to activate the Eco Extra function. 3- Freezer Compartment Temperature Setting Button Press this button to set the temperature of the freezer compartment to -15, -18, -21, -24, -15... respectively.
14- Error Status Indicator If your refrigerator does not cool adequately or if there is a sensor failure, this indicator will be activated. When this indicator is active, Freezer Compartment Temperature indicator will display “E” and Fridge Compartment Temperature Indicator will display numbers such as “1,2,3…”. These numbers on the indicator provides information about the error to the service personnel.
Things to do to have the filter usage time calculated automatically (For products connected to the mains water line and equipped with filter) 1- After plugging the refrigerator in, press A and B buttons together to activate the key lock. A A B B 2- Then press Eco-Extra (1), Fridge Compartment Temperature Setting (2), Quick Cool (3) and Freezer Compartment Temperature Setting (4) buttons respectively.
Egg tray You can install the egg holder to the desired door or body shelf. Never store the egg holder in the freezer compartment Sliding Body Shelves Sliding body shelves can be pulled by slightly lifting up from the front and moved back and forth. They come to a stop point when pulled towards front to allow you reach the foods placed at the back of the shelf; when it is pulled after slightly lifted upwards at the second stop point, the body shelf will be released.
1 2 3 4 5 6 Crisper Crisper of your refrigerator is designed specially to keep your vegetables freshly without loosing their humidity. For this purpose, cool air circulation occurs around the crisper in general. Remove the door shelves that align with the crisper before removing the crispers. You can remove the crispers as illustrated in the figure.
Movable Middle Section Movable middle section is intended to prevent the cold air inside your refrigerator from escaping outside. 1- Sealing is provided when the gaskets on the door presses on the surface of the movable middle section while the fridge compartment doors are closed. 2- Another reason that your refrigerator is equipped with a movable middle section is that it increases the net volume of the fridge compartment. Standard middle sections occupy some non-usable volume in the refrigerator.
Telescopic Drawer Dual cooling system: Pay attention not to squeeze any parts of your body such as hands, feet and etc. between the movable parts while the drawer is in use in order to avoid any injury. You can remove the partition in the drawer as illustrated when you want to clean it. You can remove the drawers only for cleaning. It is not possible to group the drawers in their places after loading them with food when they are removed.
Ice maker Ice box The ice machine is nonremovable. There must be ice container at the bottom of the ice machine. Please read the warnings carefully on the ice container. The ice container is used for ice collection poured ice machine. Do not put water in it to make ice as it may break. The ice container is not used for storing foods. Warning: Do not change the location of the ice container.
-15°C Fridge Compartment Adjustment 4°C -18,-21 or -24°C 4°C Freezer Compartment Adjustment Quick Freeze 4°C -18°C or colder 2°C -15°C or colder Quick Fridge Explanations This is the normal recommended setting. These settings are recommended when the ambient temperature exceeds 30°C. Use when you wish to freeze your food in a short time. Your refrigerator will return to its previous mode when the process is over.
Placing the food Deep-freeze information Freezer compartment shelves Various frozen food such as meat, fish, ice cream, vegetables and etc. Egg tray Egg Fridge compartment shelves Food in pans, covered plates and closed containers Fridge compartment door shelves Small and packaged food or drinks (such as milk, fruit juice and beer) Crisper Vegetables and fruits Freshzone compartment Delicatessen products (cheese, butter, salami and etc.
6 Maintenance and cleaning A Never use gasoline, benzene or similar substances for cleaning purposes. B We recommend that you unplug the appliance before cleaning. C Never use any sharp abrasive instrument, soap, household cleaner, detergent and wax polish for cleaning. C Use lukewarm water to clean the cabinet of your refrigerator and wipe it dry. C Use a damp cloth wrung out in a solution of one teaspoon of bicarbonate of soda to 600 mls of water to clean the interior and wipe it dry.
7 Recommended solutions for the problems Please review this list before calling the service. It might save you time and money. This list includes frequent complaints that are not arising from defective workmanship or material usage. Some of the features described here may not exist in your product. The refrigerator does not operate • Is the refrigerator properly plugged in? Insert the plug to the wall socket.
• The ambient room temperature may be high.This is quite normal. • The refrigerator may have just been switched on. Allow sufficient cooling time. • Large amounts of hot food might have been put in the refrigerator recently. Hot food causes longer running of the refrigerator until they reach the safe storage temperature. • Doors might have been opened frequently or left ajar for a long time. The warm air that has entered into the refrigerator causes the refrigerator to run for longer periods.
• This noise is coming from the solenoid valve of the refrigerator. Solenoid valve functions for the purpose of ensuring coolant passage through the compartment which can be adjusted to cooling or freezing temperatures, and performing cooling functions. This is normal and is not fault cause. The operation noise increases when the refrigerator is running. • The operating performance characteristics o f the refrigerator may change according to the changes in the ambient temperature.
8 Beko Customer Care Before you call Beko for service or assistance... Refer to your User Guide and check the following: 1. 2. 3. 4. Your Appl iance is correctly installed. Your Appliance is connected to power. You are familiar with its normal mode of operation You have read the ‘Recommended solutions for the problems’ If after checking the points above, the problem still exists, please call our Beko Customer Care hotline as listed below:- If calling from Australia....
www.beko.com.
