9-Light Chandelier ITEM #3519896 MODEL #70389 ROB Loop x1 B D Short Tube x1 E Long Tube x1 F C Ball Nut x12 Arm x6 G H Glass Shade x9 Lock Ring x9 Light Fixture x1 Chain x1 Canopy x1 Center Tube x1 GG HH Lock Ring Tool x1 Quick Connect Chain Link x 2
1. Attach the mounting unit (AA) to the junction box (not included) using mounting screws (BB). Then, remove the preassembled screw collar ring. 4. Secure the arms (C) on to the light fixture (A) and center tube (FF) using the ball nuts (D). 2. Place the canopy (FF) over the preassembled screw collar loop on the mounting unit (AA), and re-attach the screw collar ring until 1/2 of the screw collar loop threads are exposed. 5. Place the short tube (E) over the center tube (FF) and screw on the loop (B).
7. Lower the screw collar ring and canopy (EE) over the chain (DD). Weave the electrical and ground wires from the light fixture (A) through the chain (DD), screw collar ring, canopy (EE), screw collar loop and into the center of the mounting unit (AA). 7 9. Re-secure the canopy (EE) to the mounting unit (AA) with the screw collar ring. 9 8. 8 10. Secure the glass shades (G) to the light fixture (A) with the with the lock rings (H) using the lock ring tool (GG).
