Installation Instructions

6. Open the end link of the quick
connect chain links (HH) and attach it to
each end of the chain (DD). Secure the
chain (DD) to the screw collar loop and
the loop (B).
1. Attach the mounting unit (AA) to the
junction box (not included) using
mounting screws (BB). Then, remove
the preassembled screw collar ring.
4. Secure the arms (C) on to the light
xture (A) and center tube (FF) using the
ball nuts (D).
5. Place the short tube (E) over the
center tube (FF) and screw on the loop
(B).
2. Place the canopy (FF) over the
preassembled screw collar loop on the
mounting unit (AA), and re-attach the
screw collar ring until 1/2 of the screw
collar loop threads are exposed.
3. Put the center tube (FF) through the
long tube (F) and screw it onto the light
xture (A) while threading the xture (A)
wire through.
6
FF
F
B
E
C
D
HH
B