Manual

Unpacking
This box should contain the following parts:
1 - Pre1 User's Guide
1 - Power Cable for connection to utility
power [1.85m, 6' long]
1 - Pre1 audio preamplifier
1 - Bel Canto Owner's Warranty &
Registration Card (If purchased outside the
US please contact your dealer/distributor for
warranty information.)
Carefully unpack each piece and check for
shipping damage. If there is any damage, or if
a piece is missing, please contact your dealer or
Bel Canto Design. Save all packing materials
as the packing is specially designed to protect
the preamplifier for shipping or transporting it. If
you lose or damage the packing materials and
carton, please contact your dealer or distributor
before attempting to transport the preamplifier.
POWER Connection
The Pre1's power supply is preset for the
proper national voltages before your
receive it. The power cable should have the
correct plug for your local power system. If
you believe this is not true, please contact
your
dealer immediately.
Warning
Do not connect power to this preamplifier yet!
This preamplifier, like any electrical component, can be dangerous and cause injury unless cor
rect handling procedures are observed and used. Before powering this preamplifier it is
necessary to read and follow proper procedures concerning its setup and use.
Do not open up your Pre1 (do not remove the chassis covers). There are no user serviceable
parts inside. Any tampering of internal parts will immediately void your warranty and could
cause serious injury to you.
Complete and mail the Owner's Registration Card immediately in order to activate your warranty.