User`s guide

11
During ringing: Press to answer a call
*Subject to technical availability and to subscription from Belgacom.
**See Chapter 8.3.8 on how to program the memory key.
3.2 Base Station Overview
1.
A
Press
A
on the base station to page your handset. It will ring for
approximately 60 seconds.
Press and hold
A
on the base station for about ve seconds, the base
station is entered into registration mode and allows handset registration.
2.
, @
Steadily on while the handset is charging or in use. (Applicable only when
the LED I/O switch is slid to “I”)
Flash when receiving an incoming call. (Applicable only when the LED I/O
switch is slid to “I”)
3. LED I/O SWITCH (Bottom of the Base)
Slide the switch to "O" position to turn off the base LED
Slide the switch to "I" position to turn on the base LED when the handset is
charging on the base or in use