User`s guide

16
handset will return to standby mode.
Note: If only one handset is registered to the base station, press
C will
display “NOT POSSIBLE”
4.10.1 Intercom Another Handset
1. In idle mode, press
C
and the registered handsets will display except the
calling handset.
2. Enter the desired handset number to intercom with.
3. The called handset rings and press
T
on the called handset to establish
the internal call.
Note: If only two handsets are registered to the base station, press
C will
call another handset immediately.
4.10.2 Call All Handsets
1. In idle mode, press
C
and the registered handsets will display.
2. Press
9
to ring to all registered handsets.
4.10.3 Transfer an External Call to another handset
During an external call:
1. Press
M
and
+/-
to select INTERCOM.
2. Press
M
to select the desired handset to intercom with.
3. The external call is put on hold automatically and the called handset rings.
4. Press
T
on the called handset to establish an internal call.
5. Press
O
on the calling handset or put the calling handset on the charging
cradle to end the current call with the external party.
6. The external call is transferred to the called handset.
4.10.4 Make a 3-way Conference Call
The conference call feature allows one external call to be shared with two
handsets (in intercom). The three parties can share the conversation and no
network subscription is required.
During an external call:
1. Follow Steps 1 to 4 in section 4.10.3.
2. Press and hold
*
on the calling handset to establish the conference call.
Note: Any handset hangs up during a conference call will leave the other
handset still in connection with the external call.