User`s guide

19
6 CALLER DISPLAY
This feature is available if you have subscribed the Caller Line Identification
service with Belgacom. Your phone can store up to 20 received calls with date/
time information in the Call List. The number will be shown on the LCD when
the phone is ringing. If the number matches with one of the entries in your
Private Phonebook, the caller’s name stored in the private phonebook will be
displayed alternatively with the number. The handset will ring with the melody
associated with that phonebook entry.
If the caller number is disabled to send caller information, “WITHHELD” will
display.
If the caller number is not provided, “OUT OF AREA” will display.
In standby, if three unanswered calls are received, “3 NEW CALLS” will be
displayed.
6.1 View the Call List
All received calls are saved in Call List with the latest call putting at the top of
the list. When the call list is full, the oldest call will be replaced by a new call.
The unanswered call which has not been read is marked with a
s
at the centre
of the bottom line of the display.
1. Press
+
to access the call list.
OR
Press
M and +/- to select CALL LIST.
2. Press
+/-
to select the desired entry.
3. Press
#
to view the caller’s number if applicable.
6.2 Store a Call List Number into the Phonebook
1. Follow Steps 1 and 2 in Section 6.1.
2. Press
M
and
+/-
to select ADD TO PB.
3. Press
M
to enter the name.
4. Press
M
and the selected call list number is displayed.
5. Edit the number if necessary.
6. Press
M
and
+/-
to select the melody.
7. Press
M
to conrm.
6.3 Delete an Entry in the Call List
1. Follow Steps 1 and 2 in Section 6.1.
2. Press
M
and
+/-
to select DELETE.
3. Press
M
to conrm.