User`s guide

26
8.5 Registration
Your handset and base station is pre-registered. Up to five handsets can be
registered to a single base station.
If for some reason, the handset is not registered to the base station (
h flashes
even when the handset is near the base station), register your handset according
to the following procedure.
1. Press and hold
A
on the base station for about ve seconds, the base
station is entered into registration mode.
2. Press
M
and
+/-
to select REGISTRATION.
3. Press
M
and you are requested to enter the 4-digit system PIN (default
PIN is 0000).
4. Enter the 4-digit system PIN.
5. Press
M
to conrm.
If the handset registration is successful, the
h will stop flashing. The handset
will automatically be allocated the next available handset number. This handset
number is shown in the handset display in standby mode. If the handset
registration is unsuccessful, the
h will still flash.
8.6 Reset Your Phone
You can reset your phone to the default settings. After reset, all you personal
settings and call list entries will be deleted, but your phonebook remains unchanged.
1. Press
M
and
+/-
to select DEFAULT.
2. Press
M
and you are requested to enter the 4-digit system PIN (default
PIN is 0000).
3. Enter the 4-digit system PIN.
4. Press
M
to conrm.
5. Press
M
to re-conrm.