User`s guide

27
9 TROUBLESHOOTING
If you have difficulty with your phone, please try the suggestions listed below.
As a general rule, if a problem occurs, remove the batteries from all the
handsets in your installation for about 1 minute, then disconnect and reconnect
the power supply to the base and reinstall the handset batteries.
Problem Cause Solutions
No dialing tone when
pressing
T key
a. The connection cord of
the base station is not
plugged in.
a. Check the connections.
Unplug and plug back in
the mains. Check that
the telephone line cord
has been plugged into
the base station and the
phone socket.
b. Check the base station
plug and the 220V plug
(remove and plug-in).
c. Wait until the line is
unoccupied.
d. Use the original
connection cord.
“OUT OF RANGE’’
is displayed.
a. Base station out of
range.
b. Base station not
connected to mains.
a. Reduce the range.
b. Connect base station to
mains.
The call does not
work.
Service not activated or
wrong operator.
Check your Subscription with
network.
No display. Empty battery Recharge battery