Install Instructions

48
Tech.Doc - 03/21 - Subject to change. © Belimo Aircontrols (USA), Inc.
ZIP Economizer
BACnet Object Descriptions
48
Tech.Doc - 01/20 - Subject to change. © Belimo Aircontrols (USA), Inc
.
Z
IP Economizer
BACnet Ob
j
ect Description
s
SpCO2PPM AV [1] Zone CO2 level control
setpointin ppm
500…2000
-1 [ppm]
5…200 0 50 W
SpFreeCoolSAT AV [2] Free cooling SAT
setpoint
45…70 55 [°F] 0.5…70 2 W
VentMin AV [3] Ventilation minimum
damper position in %
0…100 -1 [%] 1…100 2 W
LowSpeedVentMin AV [4] Ventilation min. DMP
position during supply fan
low speed in %
ECOM…100 -1 [%] 1…100 2 W
DCVMin AV [5] Demand Control
Ventilation minimum
damper positionin %
0…ECOM -1 [%] 1…100 2 W
LowSpeedDCVMin AV [6] DCVentilation min. DMP
positionduring supply fan
low speed in %
DCVM…
ECOM -PLFM
-1 [%] 1…100 2 W
ExhFanOn AV [7] Exhaust Fan enable
damper positionin %
0…100 -1 [%] 1…100 2 W
LowSpeedExhFanOn AV [8] Exhaust Fan enable
DMP position during
supply fan low speedin
%
EFES…100 -1 [%] 1…100 2 W
PurgeDmpPos AV [9] Purge mode damper
positionin %
0…ECOM 0 [%] 1…100 2 W
DrybulbHighLimit AV [10] Temperature high limit
for single dry bulb
operation
60…80 ** [°F] 0.5…80 2 W
EnthHighLimit AV [11] Enthalpy high limit for
single enthalpy operation
25…30 **
[Btu/lb]
0.5…30 1 W
DiffEnthHighLimit AV [12] Enthalpy high limit for
differential enthalpy
operation
25…30 **
[Btu/lb]
0.5…30 1 W
DiffDrybulbHighLimit AV [13] Temperature high limit
for differential dry bulb
operation
60…80 ** [°F] 0.5…80 2 W
EnthTempHighLimit AV [14] Temperature high limit
for single enthalpy
operation
60…80 ** [°F] 0.5…80 2 W
DiffEnthTempHighLimit AV [15] Temperature high limit
for differential enthalpy
operation
60…80 ** [°F] 0.5…80 2 W
LowOATCompLockoutLimit AV [16] Lowest OAT value for
which the compressor
can operate (LCLO)
40…65 50 [°F] 0.5…65 2 W
ZIPCode AV [17] Sets high limit values for
sensor configuration and
ZIP Code
0…99999 00000 - - W
BusWatchdog AV [18] Timeout for Bus
Watchdog in s
(0 = deactivated
)
0…3600 0 [s] - - W
** Climate Zone depending
Object Name Object
Type /
Instance
Description Values Values
Default /
Unit
COV
Increment
COV
Increment
Default
Access