Enhanced Wireless Router User Manual

Enhanced Wireless Router

SECTIONSTable of Contents 1 2 3 5 6 7 8 9 104

CONNECTING AND CONFIGURING YOUR ROUTER

Step 1: Hardware Connections – Follow the Quick Installation Guide (QIG)

A. Unplug your modem’s power cord� Put the Router next to the

modem� Raise the Router’s antenna�

B. Locate the networking cable that connects your modem and

computer� Unplug that cable from your modem, and plug it into any

gray port on the back of the Router�

C. Find your new networking cable (included in the box with your

Router) and connect it to the yellow port on the back of the Router�

Connect the other end to your modem, in the port that’s now free�

D. Plug in your modem’s power cord� Wait 60 seconds for the modem

to start up� Plug the Router’s power supply into the black port on

the back� Plug the other end into the wall outlet�

E. Wait 20 seconds for the

Router to start up� Look

at the display on the front

of the Router� Make sure

the “Wired” and “Router”

icons are lit up in green� If

they are not, recheck your

connections�

LAN

WAN