SCREENCAST AV 4 User Manual F7D4515 8820-00863 Rev.
Table Of Contents Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Other Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 What’s in the Box? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Pictures . . . .
Getting Started Introduction Thank you for purchasing the ScreenCast AV wireless system. We built the ScreenCast AV system with a simple goal: to give people the chance to spend less time staring at their audio/ video components and more time watching their HDTV. Don’t get us wrong—we love our AV products. But we also like the idea of the living room being more about living and less about electronics.
Getting Started What’s in the Box? • ScreenCast AV Wireless Transmitter • ScreenCast AV Wireless Receiver • Two Power Adapters • High Speed HDMI ® Cable • Remote Control (battery included) • IR Emitter • Wall-Mount Kit • Manual on CD 2
Getting Started ScreenCast AV 4 Transmitter Transmitter: A. Video source select button • Allows you to cycle between video products that you have connected B. Pairing button for syncing with other ScreenCast receivers • Allows you to add additional ScreenCast receivers C. HDMI inputs 1/2/3/4 • This is where you connect your HDMI source devices like Blu-ray™ disc players, game consoles, or cable/satellite boxes. D. IR emitter port (3.
Getting Started Receiver: ScreenCast AV 4 Receiver A. Video source select button • A llows you to cycle between AV source products that you have connected B. Pairing button for syncing with other ScreenCast transmitters • Allows you to add additional ScreenCast transmitters C. HDMI output to HDTV D. USB port • This is for future product upgrades. E. Reset button • I f you press this button for less than 5 seconds, the ScreenCast receiver will restart.
General Information Your HDTV Your Audio/Video Source Components To get the most out of your ScreenCast AV system, we recommend an HDMI-enabled 1080p TV. ScreenCast AV is designed specifically for products enabled with HDMI technology like Blu-ray disc players, gaming systems, and cable or satellite receivers. If you have a 720p or 1080i TV it will still work, but you will lose some of the video quality that ScreenCast AV can provide.
General Information General Info on Range ScreenCast AV Receiver ScreenCast AV can reach up to 100 feet (30m) line-of-sight and approximately 30 feet (10m) through barriers like walls, cabinets, and doors. The receiver should be placed next to your HDTV since you will need to connect it to your HDTV via the included HDMI cable. You can choose to either wall-mount your receiver next to your HDTV with the included wall-mount kit, or set it on a TV stand or other shelf near your TV.
General Information ScreenCast AV Transmitter Controlling Your Video Sources The role of the transmitter is to wirelessly send the content from your AV source devices like Blu-ray disc players or satellite/cable boxes to your TV. There are two options for controlling the AV source products connected to the ScreenCast AV system: HDMI-CEC and IR. These approaches can be used in conjunction with one another, or you can use IR alone.
General Information HDMI-CEC HDMI-CEC is a relatively new standard that allows for devices connected to one another via HDMI to interact and control one another. In this version of ScreenCast we have implemented limited HDMI-CEC functionality to simple “standby” commands. If you activate HDMI-CEC on your TV and source device, ScreenCast will allow you to use the “standby” button on your TV remote to also put your HDMI-CEC source device into standby without having to use your source device’s remote.
Setting the Product Up Set Up the ScreenCast AV Transmitter A. B. hdmi Figure A Figure B Connect your ScreenCast AV transmitter to the included power supply and plug the power supply into an available power outlet. Press the power button to turn it on. Connect the cable labeled “IR emitter” to the back of the transmitter. Then route the four ends to the front of your video sources. These will relay remote control commands from the ScreenCast receiver.
Setting the Product Up Set Up the ScreenCast AV Receiver Figure C C D Connect your ScreenCast AV receiver to your HDTV via an HDMI cable. Connect your ScreenCast AV receiver to the included power supply and plug the power supply into an available power outlet. Press the power button to turn it on. hdmi Figure D (Optional Wall-Mount) The receiver can be wall-mounted with the included hardware and placement guide.
Setting the Product Up Set Your TV’s Input to HDMI Name Your Video Sources Turn your TV on. Using the remote that came with your TV, set the input to the HDMI port to which the ScreenCast is connected. You should see the ScreenCast language selection screen on your TV: After the language choice, ScreenCast will show you each of your video sources in turn. This will give you a chance to pick a useful name from a list of common video source names. After this step, you are done with setup.
Daily Use with Your ScreenCast Remote and On-Screen Display Switching Video Sources If you choose a different video source and press “OK,” ScreenCast will begin switching. The screen will show you that it is in the process of connecting, like the example below. When you touch any button on your ScreenCast remote, the on-screen display will wake and show a screen like the one above. In this screen, you have the choice to exit, to pick one of the four video sources, or to access the Settings menus.
ScreenCast AV Settings Naming/Renaming Video Sources Press any button on the ScreenCast AV remote to wake the on-screen display, and then move the pointer to Settings and press the “OK” button. The Settings menu below will show. This option gives you the ability to choose different names for your video sources. You can rename all four sources, just like you did during setup. You also have the choice to rename just one of the sources.
ScreenCast AV Settings Renaming All Video Sources Renaming One Video Source If you choose to rename all sources, you will then see the following message: If you decide to just rename one source, that source will be shown and you can choose a useful name from the list of common source names. Click “OK” and follow the on-screen instructions. For ease of use, the names on the list are pre-populated with a variety of standard device types; please choose the one that you feel best fits your source device.
ScreenCast AV Settings Naming/Renaming Transmitters ScreenCast AV can support up to eight transmitters. So in addition to the 4-port AV transmitter that came with this product, you might add other ScreenCast AV transmitters. For example, you might have a transmitter for your laptop, and another one for a tablet. You will then see the screen below, which will show you a list of the transmitters that have been connected to your receiver.
ScreenCast AV Settings Adding/Deleting a Transmitter Adding a Transmitter ScreenCast AV is part of the WHDI™ family, so it is possible to connect a variety of other ScreenCast transmitters to your ScreenCast AV receiver. In the Settings menu, select “Add or Delete a transmitter.” On the screen that shows next, you will choose “Add a transmitter.” Some of those transmitters have a single video source, while others have multiple sources.
ScreenCast AV Settings If connection was successful, you will see a screen similar to the one below. Note: It is possible to initiate connection with a new transmitter by pressing the “Pair” button on the back of the receiver. The “Pair” button might be labeled “Connect” on some models. After pressing the button on the receiver, walk to the transmitter and press the same Pair/Connect button there.
ScreenCast AV Settings Deleting a Transmitter To delete a transmitter, you will see a menu like this. Select the transmitter you wish to delete. Once deleted, you will see the following screen. You can reconnect the transmitter using the instructions in the “Adding a Transmitter” section. From your list of transmitters, select the device you want to delete and press “OK.” You will then see a screen asking you to confirm your choice, showing the name of the transmitter in the question.
ScreenCast AV Settings Turning Wireless On/Off There are very few situations where this would ever be necessary. If the wireless is turned off, ScreenCast AV will not communicate with any transmitters and video will not show. If you select “Yes” and elect to turn off the wireless, you will see the following screen: Even though it is not recommended, you may at some point want to turn off the wireless capabilities of the ScreenCast AV receiver.
ScreenCast AV Settings Setting/Changing the Language Using your ScreenCast AV remote, use the menu button to open up the menu screen and navigate to the “Settings” section. Within “settings” you will see an area marked “languages” at the bottom of the list. The setting page will look like this: If you select “languages,” you will see your language options, as in the example below. You should then select the one you wish to use.
Troubleshooting and FAQs What do the LEDs on the receiver mean? Connectivity Most of the information you need will appear on the TV screen, but here’s a short list of what the LED light on the transmitter and receiver can tell you. How long will it take for my ScreenCast AV system to “wake up” and connect? When your ScreenCast unit is… The light will be… Starting up Slowly blinking blue Establishing a connection Rapidly blinking blue until the connection is made.
Troubleshooting and FAQs Distance and Placement Video and Audio ScreenCast AV can reach up to 100 feet (30m) line-of-sight and approximately 30 feet (10m) through barriers like walls, cabinets, and doors. When I switch sources, why does it often take a few seconds to bring the new source up on screen? Note: Please remember that every home is different and that the ranges above are estimates. Actual range will depend on the composition of the barriers and other factors.
Troubleshooting and FAQs Other Tech Info What video formats can the ScreenCast AV system send to my TV? • Video Compatibility: • Industry Standard: WHDI™ • 480p, 720p (HDTV 2D & 3D), 1080i (HDTV), 1080p (FHDTV 2D & 3D) • WHDI™ does not compress or decompress; it uses a videomodem approach to deliver the highest video quality. • Supports 5.
other Information FCC Statement Federal Communications Commission Notice DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA 90094, declare under our sole responsibility that the product, F7D4515v1, to which this declaration relates, complies with Part 15 of the FCC Rules.
OTHER Information Belkin International, Inc., Limited 2-Year Product Warranty What is not covered by this warranty? All above warranties are null and void if the Belkin product is not provided to Belkin for inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin determines that the Belkin product has been improperly installed, altered in any way, or tampered with.
OTHER Information Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. Belkin reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin for inspection shall be borne solely by the purchaser.
OTHER Information Technical Support US http://www.belkin.
© 2011 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. HDMI is a trademark or registered trademark of HDMI Licensing LLC in the United States and other countries.