Self Help Guide Wireless Encryption Guide IMPORTANT! When setting up Wireless Encryption on your router, please perform the steps outlined in this guide on a PC directly connected to the router - NOT from your wireless PC.
Self Help Guide Step 2 Select Wireless Card F5D7000au F5D7010au F5D7001au F5D8010au F6D3000au F6D3010au F5D7050au F5D9050au Windows Zero Configuration TSG xxx011a-rev1 Page of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide For the following routers: IMPORTANT! When setting up Wireless Encryption on your router, please perform the steps outlined in this guide on a PC directly connected to the router - NOT from your wireless PC. F5D6231au4 F5D7230au4 F5D7231au4 F5D9230au4 F5D9630au4A F6D3230au4 Select Encryption Type: WEP: 64bit 128bit WPA TSG xxx011a-rev1 Page of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide 64Bit WEP • Open Internet Explorer and type in http://192.168.2.1/ or click the link • You will be presented with the following screen: • On the left side of the screen, click on Security • From the drop down box, choose 64 bit WEP • Place a tick in “To automatically generate hex pairs using a Pass Phrase…” • Type in a PassPhrase in the box and click Apply Changes. You will be presented with the screen below, write down on a piece of paper Key 1 with out any dots or space eg.
Self Help Guide 128 Bit WEP • Open Internet Explorer and type in http://192.168.2.1 or click the link • You will be presented with the following screen: • On the left side of the screen, click on Security • From the drop down box, choose 128 bit WEP • Place a tick in “To automatically generate hex pairs using a Pass Phrase…” • Type in a PassPhrase in the box and click Apply Changes.
Self Help Guide WPA • Open Internet Explorer and type in http://192.168.2.1 or click the link • You will be presented with the following screen: • On the left side of the screen, click on Security • From the drop down box, choose WPA-PSK • Close your Internet browser DONE! Click here to configure your wireless card TSG xxx011a-rev1 Page of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide For the following router: IMPORTANT! When setting up Wireless Encryption on your router, please perform the steps outlined in this guide on a PC directly connected to the router - NOT from your wireless PC. TSG xxx011a-rev1 Page of 59 F5D8230au4 Select Encryption Type: WEP: 64bit 128bit WPA If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide 64Bit WEP • Open Internet Explorer and type in http://192.168.2.1 or click the link • You will be presented with the following screen: • On the left side of the screen, click on Security • From the drop down box, choose 64 bit WEP • Type in a PassPhrase in the box and click generate. You will be presented with the screen below, write down on a piece of paper Key 1 with out any dots or space eg.
Self Help Guide 128 Bit WEP • Open Internet Explorer and type in http://192.168.2.1 or click the link • You will be presented with the following screen: • On the left side of the screen, click on Security • From the drop down box, choose 128 bit WEP • Type in a PassPhrase in the box and click generate. You will be presented with the screen below, write down on a piece of paper Key 1 with out any dots or space eg.
Self Help Guide WPA • Open Internet Explorer and type in http://192.168.2.1 or click the link • You will be presented with the following screen: • On the left side of the screen, click on Security • From the drop down box, choose WPA-PSK • Close your Internet browser DONE! Click here to configure your wireless card TSG xxx011a-rev1 Page 10 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide For the following routers: IMPORTANT! When setting up Wireless Encryption on your router, please perform the steps outlined in this guide on a PC directly connected to the router - NOT from your wireless PC. TSG xxx011a-rev1 Page 11 of 59 F5D7630au4A F5D7633au4A Select Encryption Type: WEP: 64bit 128bit WPA If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide 64Bit WEP • Open Internet Explorer and type in http://192.168.2.1 or click the link • You will be presented with the following screen: • On the left side of the screen, click on Security • From the drop down box, choose 64 bit WEP • Type in a PassPhrase in the box and click generate. You will be presented with the screen below, write down on a piece of paper Key 1 with out any dots or space eg.
Self Help Guide 128 Bit WEP • Open Internet Explorer and type in http://192.168.2.1 or click the link • You will be presented with the following screen: • On the left side of the screen, click on Security • From the drop down box, choose 128 bit WEP • Type in a PassPhrase in the box and click generate. You will be presented with the screen below, write down on a piece of paper Key 1 with out any dots or space eg.
Self Help Guide WPA • Open Internet Explorer and type in http://192.168.2.
Self Help Guide Please select model and version: The version number is printed on a sticker on the card itself and on the box the card came in.
Self Help Guide 64 Bit WEP • Double click on the Belkin Wireless Utility icon • If you are prompted with a screen labelled Connect to Wireless Network click Advanced, otherwise continue to next step • Click the Wireless Networks tab • Remove anything listed in Preferred networks • Click Refresh in Available Networks • Highlight your available wireless network and click Configure • Make sure Data encryption (WEP enabled) is ticked • Untick The key is provided for me automatically • Type in the 10 digit 6
Self Help Guide 128 Bit WEP • Double click on the Belkin Wireless Utility icon • If you are prompted with a screen labelled Connect to Wireless Network click Advanced, otherwise continue to next step • Click the Wireless Networks tab • Remove anything listed in Preferred networks • Click Refresh in Available Networks • Highlight your available wireless network and click Configure • Make sure Data encryption (WEP enabled) is ticked • Untick The key is provided for me automatically • Type in the 10 digit
Self Help Guide WPA – Windows XP Service Pack 2 only To download Service Pack 2 for Windows XP, please Click here • Open Windows Control Panel – In Control Panel, if at the top left of the screen it says Switch to Classic View – please click to switch to Classic View • Double click on Network Connections • Using your mouse, right click on the Wireless Network Connection and choose properties • Click the Wireless Networks tab • Place a tick in Use Windows to configure my wireless network settings • Click
Self Help Guide • Highlight your available WPA enabled Wireless network and click Connect • You are now prompted for your WPA network key – type in your key and retype to confirm • Click Connect DONE! TSG xxx011a-rev1 Page 19 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide For the following Wireless Cards F5D7000au version 3000 using RALINK Driver F5D7010au version 3000 using RALINK Driver Select Encryption Type: WEP: 64bit 128bit WPA TSG xxx011a-rev1 Page 20 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide 64 Bit WEP • Double click on RALINK Wireless LAN Card Utility • Click the Profile tab • Click Add • Select your correct SSID by clicking the down arrow on the drop down menu next to where it says SSID • Click Authentication and Security For WEP Encryption: • Set the Authentication Type to Open • Set the Encryption to WEP As pictured below (only used as an example, your key will be different) TSG xxx011a-rev1 Page 21 of 59 If you still require further assistance contact Belkin Technica
Self Help Guide • Type in your 128 bit hexadecimal network key and click OK DONE! TSG xxx011a-rev1 Page 22 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide 128 Bit WEP • Double click on the RALINK Wireless LAN Card Utility • Click the Profile tab • Click Add • Select your correct SSID by clicking the down arrow on the drop down menu next to where it says SSID • Click Authentication and Security For WEP Encryption: • Set the Authentication Type to Open • Set the Encryption to WEP As pictured below (only used as an example, your key will be different) TSG xxx011a-rev1 Page 23 of 59 If you still require further assistance contact Belkin Tec
Self Help Guide • Type in your 128 bit hexadecimal network key and click OK DONE! TSG xxx011a-rev1 Page 24 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide WPA • Double click on RALINK Wireless LAN Card Utility • Click the Profile tab • Click Add • Select your correct SSID by clicking the down arrow on the drop down menu next to where it says SSID • Click Authentication and Security • Change the Authentication Type to WPA-PSK • Encryption is generally set to TKIP • Type in your WPA Preshared Key and click OK As pictured below (only used as an example, your key will be different) TSG xxx011a-rev1 Page 25 of 59 If you still require further
Self Help Guide • Type in your WPA network key and click OK DONE! TSG xxx011a-rev1 Page 26 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide For the following Wireless Card: F5D7000au version 3000 using Belkin Driver F5D7010au version 3000 using Belkin Driver Select Encryption Type: WEP: 64bit 128bit WPA TSG xxx011a-rev1 Page 27 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide 64Bit WEP • Open the Belkin Wireless Utility • Click the Security tab • Click on Enable WEP Encryption • Select Manual Entry • Type in your 64 Bit WEP network key and select Key Length to 64 Bit • Click Apply DONE! TSG xxx011a-rev1 Page 28 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide 128Bit WEP • Open the Belkin Wireless Utility • Click the Security tab • Click on Enable WEP Encryption • Select Manual Entry • Type in your 128 Bit WEP network key and select Key Length to 128 Bit • Click Apply DONE! TSG xxx011a-rev1 Page 29 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide WPA • Open the Belkin Wireless Utility • Click the Security tab • Click on Enable WPA Encryption • A new screen will appear • Type in your WPA Passphrase • Click Apply DONE! TSG xxx011a-rev1 Page 30 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide For the following Wireless Card: F5D7000au version 6000 F5D7010au version 6000 F5D9050au Select Encryption Type: WEP: 64bit 128bit WPA TSG xxx011a-rev1 Page 31 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide 64Bit WEP • Open the Belkin Wireless Utility • Double click on your available wireless network • Type in your 64 Bit WEP Network Key • Click Connect DONE! TSG xxx011a-rev1 Page 32 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide 128Bit WEP • Open the Belkin Wireless Utility • Double click on your available wireless network • Type in your 128 Bit WEP Network Key • Click Connect DONE! TSG xxx011a-rev1 Page 33 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide WPA • Open the Belkin Wireless Utility • Double click on your available wireless network • Type in your WPA Pre-Shared Key • Click Connect DONE! TSG xxx011a-rev1 Page 34 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide For the following Wireless Card: F5D7050au Select Encryption Type: WEP: 64bit 128bit WPA TSG xxx011a-rev1 Page 35 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide 64 Bit WEP • Double click on the Belkin Wireless Monitor icon • Click Profiles or Profile Settings • Remove any Profile listed • Click Add • Type in a name for your profile eg.
Self Help Guide • Type in the 10 digit 64 Bit network key • Set Key Index to 1 and click Complete DONE! TSG xxx011a-rev1 Page 37 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide 128 Bit WEP • Double click on the Belkin Wireless Monitor icon • Click Profiles or Profile Settings • Remove any Profile listed • Click Add • Type in a name for your profile eg.
Self Help Guide • Type in the 26 digit 128 Bit network key • Set Key Index to 1 and click Complete DONE! TSG xxx011a-rev1 Page 39 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide WPA • Double click on the Belkin Wireless Monitor icon • Click Profiles or Profile Settings • Remove any Profile listed • Click Add • Type in a name for your profile eg.
Self Help Guide DONE! TSG xxx011a-rev1 Page 41 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide For the following Wireless Card: F5D8010au Select Encryption Type: WEP: 64bit 128bit WPA TSG xxx011a-rev1 Page 42 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide 64 Bit WEP • Double click on the Belkin Wireless Client Utility • Click More so the utility looks like the image below • Click Create • Type in a Profile name • Type in your Routers SSID • Set Security Settings to Low Security • Set the key length to 64 bits • Type in your 10 digit 64 Bit network key • Click Save DONE! TSG xxx011a-rev1 Page 43 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide 128 Bit WEP • Double click on the Belkin Wireless Client Utility • Click More so the utility looks like the image below • Click Create • Type in a Profile name • Type in your Routers SSID • Set Security Settings to Low Security • Set the key length to 128 bits • Type in your 26 digit 128 Bit network key • Click Save DONE! TSG xxx011a-rev1 Page 44 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide WPA – Windows XP Service Pack 2 only: To download Service Pack 2 for Windows XP, please Click here • Open Windows Control Panel – In Control Panel, if at the top left of the screen it says Switch to Classic View – please click to switch to Classic View • Double click on Network Connections • Using your mouse, right click on the Wireless Network Connection and choose properties • Click the Wireless Networks tab • Place a tick in Use Windows to configure my wireless network settings • Clic
Self Help Guide • Highlight your available WPA enabled Wireless network and click Connect • You are now prompted for your WPA network key – type in your key and retype to confirm • Click Connect DONE! TSG xxx011a-rev1 Page 46 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide For the following Wireless Cards: F6D3000au F6D3010au Select Encryption Type: WEP: 64bit 128bit WPA TSG xxx011a-rev1 Page 47 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide 64 Bit WEP • Double click on the Wireless Monitor Utility • Click the Available Networks tab • Highlight the name your available network and click Connect • Set the Authentication Mode to Open • Set the Encryption to 64bit then click Next • Select Input Method as Hexadecimal and Type in your Encryption Key TSG xxx011a-rev1 Page 48 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide • Click Complete DONE! TSG xxx011a-rev1 Page 49 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide 128 Bit WEP • Double click on the Wireless Monitor Utility • Click the Available Networks tab • Highlight the name your available network and click Connect • Set the Authentication Mode to Open • Set the Encryption to 128 Bit then click Next • Select Input Method as Hexadecimal and Type in your Encryption Key TSG xxx011a-rev1 Page 50 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide • Click Complete DONE! TSG xxx011a-rev1 Page 51 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide WPA • Double click on the Wireless Monitor Utility • Click the Available Networks tab • Highlight the name your available network and click Connect • Set the Authentication Mode to Open • Set the Encryption to 128 Bit then click Next • Set the Authentication Mode to WPA-PSK and select the Input Method to TKIP, the click Next • Now Enter in your WPA Key and Click Complete DONE! TSG xxx011a-rev1 Page 52 of 59 If you still require further assistance contact Belkin Technical Support Call:
Self Help Guide Windows Zero Configuration This guide applies to any Belkin Wireless Card that is using Windows to manage the Wireless or This guide may also apply to some PC’s with integrated wireless, such as Centrino Notebooks etc. For more information on Windows Zero Configuration, please click refer to Microsoft’s knowledge base.
Self Help Guide 64 Bit WEP • Open Windows Control Panel – In Control Panel, if at the top left of the screen it says Switch to Classic View – please click to switch to Classic View • Double click on Network Connections • Using your mouse, right click on the Wireless Network Connection and choose properties • Click the Wireless Networks tab • Place a tick in Use Windows to configure my wireless network settings • Click OK • Using your mouse, right click on the Wireless Network Connection and choose prope
Self Help Guide • Highlight your available WEP enabled Wireless network and click Connect • You are now prompted for your WEP network key – type in your key and retype to confirm • Click Connect DONE! TSG xxx011a-rev1 Page 55 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide 128 Bit WEP • Open Windows Control Panel – In Control Panel, if at the top left of the screen it says Switch to Classic View – please click to switch to Classic View • Double click on Network Connections • Using your mouse, right click on the Wireless Network Connection and choose properties • Click the Wireless Networks tab • Place a tick in Use Windows to configure my wireless network settings • Click OK • Using your mouse, right click on the Wireless Network Connection and choose prop
Self Help Guide • Highlight your available WEP enabled Wireless network and click Connect • You are now prompted for your WEP network key – type in your key and retype to confirm • Click Connect DONE! TSG xxx011a-rev1 Page 57 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.
Self Help Guide WPA – Windows XP Service Pack 2 only To download Service Pack 2 for Windows XP, please Click here • Open Windows Control Panel – In Control Panel, if at the top left of the screen it says Switch to Classic View – please click to switch to Classic View • Double click on Network Connections • Using your mouse, right click on the Wireless Network Connection and choose properties • Click the Wireless Networks tab • Place a tick in Use Windows to configure my wireless network settings • Click
Self Help Guide • Highlight your available WPA enabled Wireless network and click Connect • You are now prompted for your WPA network key – type in your key and retype to confirm • Click Connect DONE! TSG xxx011a-rev1 Page 59 of 59 If you still require further assistance contact Belkin Technical Support Call: 1300 554 780 Visit: www.belkin.