User's Manual

Bluetooth Hot Sync Operation for Sony Clie and PALM TungstenT, by Belkin

Bluetooth Hot Sync Operation for Sony Clie

and PALM TungstenT

Quick Setup Guide

For Sony Clie Models: NZ90, Peg-TG50, T665c- using Palm OS

Use with Belkin Bluetooth Adapters: F8T001, F8T002, F8T003

PAGE 1
Bluetooth Hot Sync Operation for Sony Clie and PALM TungstenT, by Belkin Bluetooth Hot Sync Operation for Sony Clie and PALM TungstenT Quick Setup Guide For Sony Clie Models: NZ90, Peg-TG50, T665c- using Palm OS Use with Belkin Bluetooth Adapters: F8T001, F8T002, F8T003
PAGE 2
Bluetooth Hot Sync Operation for Sony Clie and PALM TungstenT, by Belkin How to perform a Hotsync Operation with a Sony Clie Section 1: Enabling the Bluetooth on the Sony Clie. 1. Tap on Preferences, on the upper right side corner tap on the pull down error and select Bluetooth. 2. Make sure that Bluetooth: is turned on 3. Device name: anything you want to name you’re Clie 4. Allow Device To be Discovered : Yes 5. Allow Wake Up: Yes. 6. Tap on Trusted Devices Section 2: Trusting (Pairing) the device. 1.
PAGE 3
Bluetooth Hot Sync Operation for Sony Clie and PALM TungstenT, by Belkin Section 4: Setting up the Bluetooth Hotsync Operation on the PC. 1. 2. 3. 4. Open you’re Bluetooth Neigborhood or Bluetooth Places on you’re PC. On the left side click on View my Bluetooth Services or on My Device. Right click on the Serial port and click on Properties. Make sure you have a check mark on Start up Automatically and uncheck Secure connection or Encryption and click on Apply. 5.