User Manual TuneCommand™ AV for iPod®
Introduction Designed to let you roam and control your audio and video content from virtually anywhere in your home, TuneCommand AV delivers the flexibility and convenience that iPod users desire. Using wireless radio frequency technology, TuneCommand AV works from up to 120 feet away from your stereo. Please review this User Manual carefully so that you can be sure to get the most from your new Belkin product.
Legend Battery-life and range indicator Skip backward Volume up Play/pause Skip forward Volume down Shuffle button Repeat button Battery door release button (on the back) iPod connector Signal indicator Dock adapter Battery door (on the bottom) Stereo AV out Stereo line out Video out Power in S-video DC 12V/0.
Operating Instructions STEP 1 - TuneCommand AV Dock Setup iPod mini 4GB 6GB 1. Place the TuneCommand AV Dock in the desired location on your home entertainment system. ������������������������������������� iPod 20GB U2 Special Edition ������������������������������������� 2. Insert the barrel plug of the included AC power adapter into the “power in” port on the TuneCommand AV Dock. Plug the other end of the AC power adapter into your wall socket or surge protector.
Operating Instructions STEP 2 - TuneCommand AV Remote Control Setup 1. Turn the Remote Control so that the buttons are facing down. Press the release button to open the battery tray, and gently pull it out of the housing until it stops (Fig. 2). Please do not force the battery tray completely out of the housing. 2. Insert the battery with the (+) side facing up and push the battery cover back into the Remote Control until the button snaps back into place and the battery tray is securely shut. 3.
Operating Instructions You can now use your TuneCommand AV Remote Control to control the iPod’s play/ pause, skip forward, skip backward, and volume up/down functions. In addition, you can conveniently control the shuffle and repeat functions, using the two small round buttons. Each press of a button advances the setting to the next stage.
LED Chart Every time you push a button on the Remote Control, the green lights on the Remote Control and the Dock will blink, indicating that the signal has been received correctly. If the Remote Control and the Dock are too far apart to communicate, the light on the Remote Control blinks orange (after a short delay) instead of green when you press a button. The light on the Dock will not blink. The Remote Control’s battery level is automatically checked after every button press.
Using the Multi-Clip The clip allows you to wear the Remote Control on a belt, or around your neck with the lanyard.
Troubleshooting • Dock is not powering on when plugged in. Ensure the AC power adapter is completely plugged into the wall and “power in” port on the TuneCommand AV Dock. Ensure your iPod is fully inserted into the connector on the top of the Dock. • Remote Control is not powering on. Ensure that the Remote Control’s battery is inserted correctly, with the (+) facing up, that the battery tray is fully pushed in, and the release button is snapped back into position.
Specifications Operating Range: Up to 120 ft. (36.6m) Transmission Method: Radio frequency Frequency: 2.44GHz Remote Battery: CR 2032 3V Remote Dimensions: 3.5” x 1.5” x 0.5” (8.9cm x 3.8cm x 1.3cm) (not including belt clip; 0.75” (1.9cm) max depth including belt clip) Remote Weight (including battery): 0.8 oz. (22.6g) Dock Dimensions: 3.5” x 3.5” x 1.00” (8.9cm x 8.9cm x 2.5cm) Dock Weight: 3.4 oz. (96.4g) Clip/Surface Mount/Lanyard: 0.47oz. (13.
Information FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product: F8Z065 to which this declaration relates: Has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Belkin Corporation Limited 3-Year Product Warranty What this warranty covers. Belkin Corporation warrants to the original purchaser of this Belkin product that the product shall be free of defects in design, assembly, material, or workmanship. What the period of coverage is. Belkin Corporation warrants the Belkin product for three years. What will we do to correct problems? Product Warranty.
Belkin Corporation Limited 3-Year Product Warranty Belkin Corporation reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin Corporation for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin Corporation, Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment.
Belkin Corporation 501 West Walnut Street Los Angeles, CA 90220, USA 310-898-1100 310-898-1111 fax Belkin Ltd. Express Business Park, Shipton Way Rushden, NN10 6GL, United Kingdom +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 fax Belkin B.V. Boeing Avenue 333 1119 PH Schiphol-Rijk, The Netherlands +31 (0) 20 654 7300 +31 (0) 20 654 7349 fax Belkin Ltd. 7 Bowen Crescent, West Gosford NSW 2250, Australia +61 (0) 2 4372 8600 +61 (0) 2 4372 8603 fax Tech Support US: 310-898-1100 ext. 2263 800-223-5546 ext.
