User manual
STEP 1 - TuneCommand AV Dock Setup
1
.
Place the TuneCommand AV Dock in
the desired location on your home
entertainment system.
2.
Insert the barrel plug of the included AC
power adapter into the “power in” port on
the TuneCommand AV Dock. Plug the other
end of the AC power adapter into your wall
socket or surge protector.
3.
Insert the 3.5mm end of the included AV
cable into the “Stereo AV Out” port on the
TuneCommand AV Dock. Plug the other end
of the AV cable into the input ports on the
back of your TV or stereo receiver.
NOTE:
For optional connectivity, you can
use your own 2-RCA-to-2-RCA and S-video
cables in lieu of the included AV cable.
Connecting through the RCA outputs
disables the volume-control functionality of
the Remote Control.
4.
Select the appropriate insert tray for your
iPod and insert it into the top well of the
TuneCommand AV Dock (Fig. 1). Inserts for
the iPod video and iPod nano are included
with your purchase of the iPod.
5
.
Insert the iPod into the
TuneCommand AV Dock.
Operating Instructions
Operating Instructions | 03
Pull up here to remove the insert
iPod mini
4GB 6GB
iPod
20GB
U2 Special Edition
iPod
40GB
iPod with color display
20GB 30GB
U2 Special Edition
iPod with color display
40GB 60GB
SNAP
SNAP
Fig. 1