User manual

Operating Instructions

| 04

STEP 2 - TuneCommand AV Remote Control Setup

Turn the Remote Control so that the buttons are facing down. Press the release

button to open the battery tray, and gently pull it out of the housing until it stops

(Fig. 2). Please do not force the battery tray completely out of the housing.

Insert the battery with the (+) side facing up and push the battery cover back into

the Remote Control until the button snaps back into place and the battery tray is

securely shut.

Now press any of the Remote Control’s buttons for the TuneCommand AV Remote

Control and Dock to pair up. The green lights on the Dock and the Remote

Control blink when the first button-press command from the Remote Control

reaches the Dock correctly.

NOTE: If the battery is removed or replaced, you

will need to unplug the AC power adapter from the TuneCommand AV Dock

and plug it back in to reestablish connection with the Remote Control.

Fig. 2