Belldinni DIY Friendly Ready to be installed like a pre-hung door kit with Easy Installation kit QR code to have EZ installation instructions on your phone
1
2 NECESSARY TOOLS Not included A Screwdriver Screw 1 5/8” Pencil Garbage bags Shims (not included) Tape measure Level Safety glasses DOOR PARTS (some fixtures may not be included) B Header Screw inside white connector 4 pcs C Black 4 pcs. opposite connector F Screw 6 pcs. G Door slab is already predrilled for hinges and a handle. Screw 18 pcs. D Dowel 2 pcs Qty depends on the height of the door (2 or 3 pcs).
3 STEP 1. Check your order Check the contents of your door unit according to the door parts description above (page 3) If you have any problems or questions please contact us via diy@belldinni.com or by phone # 646 680 3191 Measure roungh opening to make sure all sizes are correct: Door slab should be at least 2” narrower than the opening width, we recommend the door slab to be 2,5” narrower than the opening width. Door slab should be at least 2” shorter than the opening height.
4 STEP 2.
5 STEP 3.
6 STEP 4.
7 STEP 5.
8 STEP 6.
9 STEP 7.
10 STEP 8.
11 STEP 9.
12 STEP 10. Adjustment and installation Strike plate jamb side (handle) Hinge side Check and adjust the hinge side of the jamb according to the level first. Fix the hinge side jamb to the wall with the help of EZ hangers, “A” screws ( 1 5/8”) (not included) and shims (not included) if needed. Unscrew the screws of the strike plate side (handle side) of the jamb. Align the door slab within door jamb (frame) minding the gaps between the door slab and the door jamb.
13 STEP 11.
14 STEP 12.
