Operator`s manual

Belshaw Bros., Inc. • www.belshaw.com • Phone [phone] • Fax [phone]
6 MN-1128EN 618L, 624, and 634 Fryers TS
THE HEATING ELEMENTS WILL NOT HEAT
Possible Causes What To Do
The fryer’s circuit breaker has been tripped. Press the red reset button on the back of the heater
head.
The high-temperature limit control switch has
been tripped.
Press the red reset button on the back of the heater
head.
WARNING
Before doing any of the following, turn off the
machine and allow the shortening to cool.
The contactor is defective. Replace the contactor.
A heating element is defective. Replace the defective heating element.
The high-temperature limit control is defective. Replace the high-temperature limit control.
The thermostat is out of adjustment. Re-calibrate the thermostat. See Appendix B,
“Electrical Components.”
The thermostat is defective. Replace the thermostat.