Instructions

DESKTOP RAPID CHARGER
FUNCTION
CHARGING PROCEDURE
CONSTRUCTION
WARNING
Thanks for purchasing our products. Please kindly read
detailed instruction manual before using the product.
The battery charger is designed exclusively for use with
Ni-CD and Ni-MH battery pack when either attached to
or removed from the transceiver.
1. Plug the AC adapter into the adapter jack
on the back of the charger.
2. Plug the AC adapter into an AC outlet.
3. Along the guides provided on both sides of
the charger slot , insert a battery pack or
transceiver attached a battery pack into the
charger. The charging LED illuminate in red ,
and charging starts.
4. When charging is completed , the color of the
FULL LED change to green, remove the battery
pack or transceiver from charger slot.
5. Unplug the AC adapter from the AC outlet.
1. The battery charger is designed exclusively for
use with Ni-CD and Ni-MH battery pack. Do not
use it to charge any other rechargeable battery
or dry cell.
2. Do not expose the charger to high/low temperature
and damp places.
3. Do not use the battery charger as a power source
for any appliances.
4. Do not disassemble the charger. Incorrect
reassembly can cause fire or electric shock.
5. During charging cycles it is normal for the
battery to become warm. If the battery become
too hot to touch during charging, unplug the
charger and discontinue using.
6. If the battery charger is not used for a long
period of time, disconnect the AC adapter from
the wall socket and remove the battery pack
from the battery charger.
INDICATOR DESIGNATION
Charger Operation
Status
Charge LED Full LED Power LED
Power connection
Without battery
Charge
Full charged
Function failure
Green flash
Off
Red flash
Off
Red
Off
Red flash
Green
Off
Off
Red
Red
Red
Red
Red
EMS-30