Owner's Manual

and is designed for use in high density microwave areas.
Factory setting is “CTY X ”.
Note—once “
CTY X”or “CTY ALL” is chosen in
Selectable Features,the cty button must be pressed to engage
your selection.
X/K/Ka Band On or Off
Select “X on/X off”,“K on/K off”or “Ka o n /Ka o f f”
depending upon your driving environment and selectivity
requirements.This mode is especially useful where falsing
may occur and disabling the offending band may be required.
Factory setting is on for all three Bands.
Auto-Mute On/Off
With “Amute on”,unit will provide several X,K,Super
Wideband Ka audio alerts.After the audio alerts,a “clicking”
tone keeps you quietly informed for as long as the signal is
present.This clicking becomes more rapid as the strength of
the Radar signal increases.“Amute on”enables you to
conveniently monitor extended encounters without having to
manually mute or adjust the volume setting.
With “
Amuteo ff,” unit will provide a continuous series of
X,K,Super Wideband Ka and Laser audio alerts.This
standard setting is often preferred when background noise in a
vehicle is loud.Factory setting is “Amuteo ff.”
Note:because of their urgency, Laser alerts are not affected.
Safety Warning System
®
(sws
™
)
When on,unit will provide a Message when signals from sws
™
transmitters are detected.Factory setting is on.
Audio/Visual Scroll Rate
When “
SCRLslow” is selected,unit will provide a slow cycling
of audio/visual messages.When “SCRLf a s t ” is selected,unit
will provide a fast cycling of audio/visual messages.Factory
setting is “SCRLslow.”
