Owner's Manual


Instaclear is a registered trademark of the Ford Motor Company.
ElectriClear is a registered Trademark of Libbey,Owens,Ford,and Delco-Remy.
Entering Selectable Features Mode
1. With the unit off, press and hold the cty button,then press
the pwr button. The word “
FEATURES”will appear in the
display and a short audible “beep”will sound indicating you
are now in the Selectable Features Mode.
2. Immediately after the “beep”, the display will show the status
of the first Selectable Feature (City X or City All).
3. Press the aud button to make your selection.Press the cty
button to move to the next Selectable Feature.Repeat the
process until you have made your selection for each
Selectable Feature.
4. Press the pwrbutton to exit Selectable Features mode.Two
“beeps”confirm that you have exited this mode and either
“
HI GHWAY”or “CITY”will be presented in the display,based
on your previous selection.Your unit is ready for operation.
installation
General Guidelines
Do not mount your unit directly behind windshield wipers or
mirrored sunscreens which block Radar and Laser signals
and substantially reduce warning range.Unlike “after market”
mirrored sun-screens,regular tinted glass does not affect
Radar reception.Radar signals are also reflected by the “heated
windshields”known as Instaclear
®
and ElectriClear
®
available
as an option on some vehicles.This type of windshield makes
any dash,visor or windshield mounted detector ineffective.
(If in doubt,check with an appropriate dealership to see if
this applies to your vehicle.) To achieve optimum performance,
regardless of which mounting position you choose,follow the
basic steps on the following page:
1. Consider occupant safety when selecting a mounting location.
Choose a location where the unit will not be hazardous in
case of an accident.